drv_menu   84 85 86
pmdir      80
pmres      81 81 81 81
pmconf     81 82 83
pmadapters 82 82
pmboot     83


80
This entry should contain a complete DOS path to your
PM driver directory. It should have the following format:

drive:\directory

Type or edit the DOS path using the keys indicated at the
bottom of your screen, then press <Enter> to accept.

The installation program assumes that the source files are to
be copied there from the default directory. (i.e., the drive
and directory where you initiated this installation.)
Normally this would be your floppy diskette drive A:



81
Choose the driver which you wish to have installed, based
on the the resolution and/or the number of colors that
you require for a particular application.

Position the cursor over chosen driver and press <Enter>

Press <Esc> to abort PM driver installation.


82
If your system has only one display and it is attached to
your Graphics Adapter, then choose the 'Single' adapter option.

If you are installing the Graphics Adapter and have two displays
attached to your system, then select the 'Dual' adapter option.

Position the cursor over your selection and press <Enter>


83
Supply a one character entry for the drive from which your
system ordinarily boots.

In many cases it is drive 'C', so press <Enter> to accept
it, otherwise enter the boot drive.

The installation program will then make alterations to your
CONFIG.SYS file in the root directory of the boot drive.


84
This selection installs the driver for any version 1.X of OS/2.


85
This selection installs the driver for version 2.0 of OS/2.


86
This selection installs the driver for version 2.1 of OS/2.



-1


