*******************************************************************
*                   U.S. ROBOTICS CORPORATION                	  *
*                U.S. Robotics 10/100 PCI NIC TX 	          *
*               NDIS4 MINIPORT DRIVER INSTALLATION             	  *
*                                                                 *
*            COPYRIGHT 2001 U.S. ROBOTICS CORPORATION        	  *
*                       ALL RIGHTS RESERVED.                      *
*******************************************************************

The driver (USR7900.SYS) contained in the root is for the following 
U.S. ROBOTICS Ethernet adapter:

        U.S. Robotics 10/100 PCI NIC TX 

The driver (USR7900.SYS) conforms to the Network Driver Interface
Specification NDIS/4, and is used with Microsoft Windows 95

  Contents:
  ---------
   (A) Installing NDIS4 Miniport driver in Microsoft Windows 95
   (B) Configuring NDIS4 Miniport driver in Microsoft Windows 95
   
(A) Installing NDIS4 Miniport driver in Microsoft Windows 95
=================================================================
    1. Plug U.S. Robotics 10/100 PCI NIC TX into one of the Master PCI
       slots of your PCI platform.
    2. Turn the power ON, then boot from Windows 95.
    3. When Windows 95 prompts with "PCI Ethernet Controller" in
       "New Hardware Found" dialog box, click the "Next" button.
    4. Select "Search for the best driver for your device (Recommended)"
       form the "Add New Hardware Wizard" dialog box, then click the
       "Next" button.
    5. Insert the USR7900 Driver Diskette in your floppy drive.
    6. Select "Specify a location" and type Path "A:\" in the "Add New
       Hardware Wizard" dialog box, then click the "Next" button.
    7. Click the "Next" button in the "Add New Hardware Wizard" dialog box.
    8. Windows 95 will prompt with "U.S. Robotics 10/100 PCI NIC TX " in 
       the "Add New Hardware Wizard" dialog box.
    9. Click the "Next" button in the "Add New Hardware Wizard" dialog 
       box, then Windows 95 will copy the driver from A:\ to the 
       C:\WINDOWS\SYSTEM directory and the NETUSR79.INF file from A:\ to
       the C:\WINDOWS\INF directory.
   10. When Windows prompts with "U.S. Robotics 10/100 PCI NIC TX " in 
       the "Add New Hardware Wizard" dialog box,click the "Finsh" button.
   11. Remove the USR7900 Driver Diskette from your floppy 
       drive.
   12. Restart your computer to initialize the network function.

       NOTICE!! C:\WINDOWS is the directory where your Windows 95
                O.S. is located.


(B) Configuring the NDIS4 Miniport driver on Microsoft Windows 95
====================================================================

    1. Click the "My Computer" icon in the Main Program Group.
    2. Click the "Control Panel" icon in the My Computer window.
    3. Click the "Network" icon in the Control Panel window.
    4. Select the "U.S. Robotics 10/100 PCI NIC TX " item from the 
       "Network" dialog box, then click the "Properties" button.
    5. Click the "Advanced" button in the "U.S. Robotics 10/100 PCI 
       NIC TX " dialog box.
    6. Configure the parameter settings, then click the OK button in the
       "U.S. Robotics 10/100 PCI NIC TX Properties" dialog box.
    7. Click the OK button in the "Network" dialog box.
    8. Restart your computer to implement the new configuration.


Trademarks:
Microsoft Windows 95 is a trademark of Microsoft Corporation.


