Tablet Driver for AutoCAD R13 for Windows

1. Introduction

     Before "DGWINTIM.DLL" driver is issued, PC user should use mouse as
   system cursor to open AutoCAD for WINDOWS program. Then digitizer can
   be used as cursor in AutoCAD operation. With  "DGWINTIM.DLL"  driver,
   tablet as cursor input device in R13 & Windows could be possible.  In
   addition to initial point function, this driver provides more feature
   like pickup, mole etc.

2. Driver features

   2.1. Driver let digitizer operate as "Digitizer"

        This driver let user can use R13 template as well as  the  other
        digitizer driver can do. User can pickup macro key  direct  from
        digitizer.

   2.2. Driver can operate as "MOLE"

        User can define "MOLE" area , and cursor in "MOLE" area acts  as
        system cursor.

   2.3. Driver can act as system cursor by one click.

        User can define one button as toggle button to toggle system cur-
        sor and R13 cursor by one click.

   2.4. Drive can automatically toggle system/R13

        This driver automatically detects operator's AutoCAD command  to
        change tablet as system cursor or R13 cursor input device.

3. Driver installation

   Copy DGWINTIM.DLL to R13 for Windows DRV directory.
     Ex. copy DGWINTIM.DLL \R13\DRV

4. Driver configuration

   4.1. In R13 command line type "config". Press return key.
   4.2. Press return key.
   4.3. Select 4 for configure digitizer. press return key.
   4.4. Select AASHIMA Driver. press return key.
   4.5. Please press "Y" or "N" for mole area.
        4.5.1. if you press "Y", It shows "Please click your  lower  left
               mole area". Then select and click. And  it  shows  "Please
               click your upper right mole area". Then select and click.

   4.6. Please press "Y" or "N" for toggle button.
        4.6.1  if you press "Y", please select one button  except  button
               one.

5. Driver version note

     This driver is version 1.0, and must use tablet.drv 4.1 or later for
   windows system.
