                         SEAGATE TECHNOLOGY, INC.
                              1-800-SEAGATE
                          http://www.seagate.com
                            (C)opyright 1996


ST-3852A, Medalist 850 AT (Belize CFA851A)

  ͻ
   REAR VIEW 
  ͼ

                   J2  40 pin I/O Cable Connection
                   
          1/\    TOP (HDA)
       ͵::::::::::::::::::1 : : :  0 0 0 0 
        ͳͳͳͳ5GG12    BOTTOM
                                
   pin-20 removed               Reserved
                                 Slave Present (when Master ON)
                                 Cable Select (when Slave OFF)
                                Master ON, Slave OFF



                             ST-3852A
                         Medalist 850 AT

       FORMATTED CAPACITY _______________________852.59
       ACTUATOR TYPE ____________________________VOICE COIL
       CYLINDERS __PHYSICAL______________________
       HEADS ______PHYSICAL______________________2
       DISCS (3.5 in) ___________________________1
       MEDIA TYPE _______________________________THIN FILM
       HEAD TYPE ________________________________THIN FILM
       RECORDING METHOD _________________________ZBR RLL (1,7)
       INTERNAL TRANSFER RATE (Mbits/sec) _______up to 88
       EXTERNAL TRANSFER RATE (Mbytes/sec) ______up to 16.6
       PIO MODE _________________________________4
       DMA SUPPORT ______________________________EISA Type B
       SPINDLE SPEED (RPM) ______________________4500
       AVERAGE LATENCY (mSEC) ___________________6.67
       BUFFER ___________________________________128K
        Read/Write Multiple, Read Look-Ahead,
        Multi-Segmented
       INTERFACE ________________________________Fast ATA-2
       SECTORS PER DRIVE (LBA mode) _____________1,665,216
       TPI (TRACKS PER INCH) ____________________
       BPI (KBITS PER INCH) _____________________
       AVERAGE ACCESS (ms) ______________________12
       SINGLE TRACK SEEK (ms) ___________________3
       MAX FULL SEEK (ms) _______________________
       MTBF (power-on hours) Office _____________300,000
       SHOCK (G's):
                operating (Read/Write) __________5
                abnormal ________________________
                nonoperating ____________________75
       ACOUSTICS (dBA) (typ/max) _______________34/
       POWER DISSIPATION (watts) ________________
       POWER REQUIREMENTS: +12V START-UP (amps) _1.4
       POWER MANAGEMENT (Watts):
                           ACTIVE _______________4.9
                           IDLE _________________4.0
                           STANDBY ______________<1.0
       WRITE PRECOMP (cyl) ______________________N/A
       REDUCED WRITE CURRENT (cyl) ______________N/A
       LANDING ZONE (cyl) _______________________AUTO
       IBM AT DRIVE TYPE ________________________*

       Physical:
                        Height (inches/mm):  1.00/25.4
                        Width  (inches/mm):  4.00/101.6
                        Depth  (inches/mm):  5.75/146.1
                        Weight    (lbs/kg):   1.25/0.57


 * MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)

Possible translations:
                       This translation is generally acceptable, as
                       is, for non-DOS operating systems:
       1652 cyl, 16 heads, 63 sectors = 852,590,592

                       DOS operating systems may require a translation
                       that uses larger values for the CMOS head
                       parameter which lowers cylinders below 1024:
        826 cyl, 32 heads, 63 sectors = 852,590,592

                       Other FULL-CAPACITY solutions for DOS operating
                       systems include third-party drive preparation
                       software, system BIOS which supports LBA mode
                       or bios driven host adapters. Otherwise,
                       capacity may be limited to:
       1024 cyl, 16 heads, 63 sectors = 528,482,304


Note: A "custom" or "user-definded" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product 
offerings or specifications. (09/19/96)

