                B1S/2K AWARD BIOS V1.1SLRC Release note.
 
This disk contains three files:AWDFLASH.EXE, B1S2V11.BIN and README.TXT

1.The checksum of B1S2V11.BIN is 7C92(Hex) ;

2. How to use AWDFLASH.EXE utility:
   This is a flash memory write/read utility.
IMPORTANT NOTE:
   The AWDFLASH utility could not correctly run in windows (virtual 8086)
   MS-DOS mode. It must be proceeded with the following steps:
      1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
        from the dos prompt under DOS6.XX or WINDOWS9X environment.
      2.Boot system with diskette.
      3.Then run the AWDFLASH utility.
Usage:
      AWDFLASH [BIOSfile1] [BIOSfile2] [/<sw>[/<sw>...]]
     BIOSfile1: New BIOS Name For FLASH Programming
     BIOSfile2: BIOS File For Backing-up the Original BIOS

 <command> function definition:
      cc: clear CMOS;        cp: clear PnP;
      cd: clear DMI.
/sn: No Original BIOS Backup. If this option is chosen:
      Be sure your new BIOS is compatible with your MB. If not, the system 
        are damaged.
/sy: Backup Original BIOS to Disk File.
Examples:
        AWDFLASH ****.BIN /py/sn/cd/cp

Warning: 
   Avoid power-off incidently in upgrading procedure, or system would fail
   to reboot!

3.Note:
    before using awdflash to update your BIOS, you should change the "FLASH WRITE PROTECT" to "disable".The item "Flash Write Protect"  is an item of BIOS FEATURES SETUP in CMOS setting.

UPDATE DATE:12/08/1999
