   Windows NT 4.0

   Introduction:
   -------------
   This document describes the procedure to install  Windows NT v4.0
   driver for Realtek RTL8169 PCI Gigabit Ethernet adapter.

   Location of Driver:     \WINNT4\RTL8169N4.SYS

   Installing driver procedure on Microsoft Windows NT :
   -----------------------------------------------------

       1. In the "My Computer" icon of Winnt4, choose the "Control Panel"
          icon.

       2. In the "Control Panel" window, choose the "Network" icon.

       3. In the Network Settings dialog box, choose the "Adapters"
          item. The Add Network Adapter dialog box appears.

       4. In the list of network cards, select "Have Disk...", and
          then press <Enter> button.

       5. Insert this driver disk in drive A, enter drive and pathname 
          A:\Winnt4 and then choose the <OK> button.

       6. In the installed adapter dialog box, you will see the product
          list as following:
 
              "Realtek RTL8169 Gigabit Ethernet Adapter"
             
          in the menu, select the exact product and use <OK> button
          to install it. 

       7. After that, installation is completed.

       8. To complete network installation, remember binding the adapter
          to  transport  drivers by  choosing <OK> button under Network
          Setting dialog box.

       9. Restarting your system you will acquire network service.

