   Windows 98SE

   Introduction:
   -------------
   The Gigabit driver don't support Windows98,only support Windows 98SE.
   This document describes the procedure to install Windows 98SE
   driver for Realtek RTL8169 PCI Gigabit Ethernet adapter.

   Location of Driver :   \Win98\RT8169N5.SYS

   Installing driver procedure on Microsoft Win98 SE :
   -------------------------------------------------------------------
      Before you start with the installation process, make sure that your
      adapter should be properly installed in your PCI bus slot.
      Executing Win98SE, it will auto-detect your system configuration
      and find the adapter hardware.  

      1. When Windows 98SE prompts with "PCI Ethernet Controller" in
         "New Hardware Found" dialog box, click the "Next" button.

      2. Select "Search for the best driver for your device (Recommended)"
         form the "Add New Hardware Wizard" dialog box, then click the
         "Next" button.

      3. Insert the Realtek RTL8169 driver disk into drive A and specify
         the setup file pathname A:\Win98, then click the "Next" button. 

      4. Windows 98SE will prompt with "Realtek RTL8169 Gigabit Ethernet
         Adapter" in the "Add New Hardware Wizard" dialog box.

      5. Click the "Next" button in the "Add New Hardware Wizard" dialog
         box,then Windows 98SE will copy the driver(.sys) from A:\Win98
         to the C:\WINDOWS\SYSTEM directory and the driver(.inf) from
         A:\Win98 to the C:\WINDOWS\INF directory.

      6. When Windows prompts with "Realtek RTL8169 Gigabit Ethernet
         Adapter" in the "Add New Hardware Wizard" dialog box, click
         the "Finish" button.

      7. Win98SE will finish the other installation procedure
         automatically, then you restart the system.



