Windows NT 4.0 Setup Instructions
Setup Instructions

For adapter hardware installation, refer to the Installation Guide that came with your adapter. For software driver installation, choose from the list below:

Windows* NT* 4.0

Novell NetWare*

Unix* and Others

Make Diskettes

* Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe.


Windows* NT* Driver Installation
Windows NT Driver Installation

Experienced Network Administrators:

1	Install the Intel adapter in your server PCI bus.

2	Power on and launch the Network Control Panel

3	Click the Adapters tab and click Add.

4	Insert the Intel CD and click Have Disk

5	Select the Intel adapter on the list that appears and click OK

6	The drivers and the PROSet utility installs.

7	Click close to finish. If you have TCP/IP installed, a configuration window appears.

8	Restart Windows NT when prompted.

Other Users:

Follow the steps in the Installation Guide that came with your adapter.

Other Microsoft Operating Systems and Additional Information:

See the Microsoft readme file for additional installation instructions and adapter configuration information.

  MS.TXT

Windows NT 4.x Unattended Install (PUSH)

See the Microsoft NT PUSH readme file for setup instructions and sample templates.

  NTPUSH.TXT


Novell NetWare* Driver Installation
Novell NetWare Driver Installation

Novell NetWare 5.0 and 4.11

Read the step-by-step adapter installation instructions in the printed Installation Guide included with your adapter.

Novell NetWare 4.10 and Earlier

See the NetWare readme file for installation instructions, sample load commands, and hints and tips.

  NETWARE.TXT

Novell NetWare Client 32 for Windows 95 and DOS/Windows 3.1x

See the NetWare readme file for installation instructions, sample configurations, and hints and tips.

  NETWARE.TXT

Novell NetWare ODI Client Drivers for OS/2 and DOS

See the NetWare readme file for installation instructions, sample configurations, hints and tips, and example files.

  NETWARE.TXT

Novell NetWare Client Services for Windows NT 4.0 Using the ODI Server Driver

See the NetWare readme file for installation instructions.

  NETWARE.TXT


Other Operating Systems
Unix and Other Operating Systems

For Unix, see the Readme file, UNIXINFO.TXT in the \info\general directory on this CD.

  UNIX.TXT

For other operating systems or configurations, see the Readme file, OTHER.TXT in the \info\other directory on this CD.

  OTHER.TXT


Make Diskettes

If you need to use a floppy disk to install the PRO/100+ adapter drivers use MAKEMS.BAT (for Microsoft operating systems) or MAKENW.BAT (for NetWare), located in the \MAKEDISK directory on this CD-ROM. The format for the command is:

D:\MAKEDISK\MAKEMS.BAT D: A:

In the example above, D: is your CD-ROM drive and A: is your floppy drive.

If you need to make a disk for a Unix installation, refer to the following readme file:

  UNIX.TXT