   Windows 2003 Installation guide

   Introduction:
   -------------
   This document describes the procedure to install Windows 2003 driver
   for ASIX AX88172 USB2 to Fast Ethernet Adapter.


   Installing driver procedure on Microsoft Windows 2003 :
   -------------------------------------------------------------------
      Before you start with the installation process, make sure that your
      ASIX AX88172 USB2 to Fast Ethernet Adapter should be properly installed in 
      your USB port. Executing Windows 2003, it will auto-detect your system
      configuration and find the adapter hardware.

      1. Install Hardware Device Driver Wizard will ask you how to install,
         please select "Search for a suitable driver for my device".

      2. Locate Driver Files Wizard will ask you where is the driver
         location, please select "Floppy disk driver".

      3. When Digital Signature not found windows appear, please press
         "Yes" bottun to continue installation.

      4. If WindowsME appear a message that it can not found AX88172.INF/
         AX88172.SYS, please specify the driver path name A:\

      5. Windows 2003 will appear some messages to insert Windows 2003 system
         disk to complete setup step.

      6. Windows 2003 will finish the other installation procedure
         automatically, then ask you restart the system.