Installing Windows 98SE Driver

   Introduction:
   -------------
   This document describes the procedure to install Windows 98SE
   driver for Realtek RTL8169/8110 Family Gigabit Ethernet NIC.

   Location of Driver :   \Win98SE\RTLNIC.SYS

   Installing driver procedure on Microsoft Win98SE :
   -------------------------------------------------------------------
      Before you start with the installation process, make sure that your
      adapter should be properly installed in your PCI bus slot.
      Executing Win98SE, it will auto-detect your system 
      configuration and find the adapter hardware.  

 1. Make sure that the Realtek RTL8169 Gigabit Ethernet NIC is inserted.
 2. In the Add Hardware Device Driver Wizard window, click Next. If this 
    window does not appear, click System and then click Reflesh. 
 3. Click the recommanded item and Next.
 4. Insert the diskette in the floppy drive. Type the directory 
    "x:\Win98SE" and click OK.
 5. In the copying files window, type "x:\Win98SE" and click OK.
 6. If prompted, supply the Windows 98SE CD-ROM or type the directory
     path to the Windows 98SE files on your PC and click OK. 
 7. In the Update Device Driver Wizard, click Finish.
 8. Remove the diskette and restart computer.
