   Windows 2003

   Introduction:
   -------------
   This document describes the procedure to install Windows 2003
   driver for Realtek RTL8169/8110 Family Gigabit Ethernet NIC.

   Location of Driver :   \WIN2003\RTLNICXP.SYS

Installing driver procedure on Microsoft Windows 2003 :
   -------------------------------------------------------------------
      Before you start with the installation process, make sure that your
      adapter should be properly installed in your PCI bus slot.
      Executing Windows 2003, it will auto-detect your system
      configuration and find the adapter hardware.  

    1. Windows 2003 will install built-in driver "Realtek RTL8169
       Family Gigabit Ethernet NIC" automatically.

    2. Restart your computer, then you can update the newer driver from
       the provided Driver Diskette.

    3. Double click button on "System" icon from "Control Panel".

    4. Double click the "Device Manager" in "Hardware" dialog box.

    5. Windows 2003 will prompt all device groups in your computer, please
       select "Network Adapter" group.

    6. Double click the "Realtek RTL8169 Family Gigabit Ethernet NIC"
       device from "Network Adapter" group.

    7. Click "Driver" button in "Realtek RTL8169 Family Gigabit Ethernet
       NIC Properties " dialog box.

    8. Click "Update Driver ..." button
 
    9. From "Hardware Update Wizard" window, please choose "Install from
       a list or specific location(Advanced)" then click Next button.

   10. Insert the Realtek RTL8169 driver disk into drive A and specify
       the setup file pathname A:\WIN2003 in the "Hardware Update Wizard"
       dialog box, then click "Next" button.

   11. Windows will prompt "Realtek RTL8169/8110 Family Gigabit Ethernet NIC".

   13. Click "Finish" button in the "Hardware Update Wizard" dialog
       box. 