CGP Graphite Terminator Series
             Installing the S3 Windows NT 3.1 display driver


   ===============================================================



      Installation Procedure
      ----------------------
        
      Microsoft Windows NT 3.1 must already be installed on your
      system.

      1) Insert the display driver diskette into the floppy drive. 
           
      2) Go to group "Main" and click on icon: Windows NT Setup.  
          
      3) Select "Options" and choose "Change System Settings".

      4) Select "Display" then choose item "Other (Requires a
         disk from a hardware manufacturer)".
        
      5) Follow the instructions on screen and give correct
         path information (eg. A:\NT\NT31).   
        
      6) Select desired display resolution and re-start the
         system.


      NOTE:
      -----

      1) You may need to repeat installation procedure step 4
         to 6 when changing the refresh rate from one to
         another for the first time.   
           
      2) Make sure your monitor can synchronize the resolution
         and refresh rate that you plan to select.