Additional Information MDP3858-E Data+Fax Modem Card Ver 1.10 Installation on Win 95 Platform ================================ 1. Win95 will automatically detect the MDP3858 PnP Modem Card and displays the "New Hardware Found" dialog box. 2. Insert the installation diskette provided into either drive A or B. 3. Select the "Driver from disk provided by Hardware manufacturer option and click OK. 4. Type A:\ (or B:\) in the combo box and click OK. You might encounter some resource conflicts after loading the PnP modem device (especially when there are non-Plug & Play adaptors installed in your system). To alter the resource configurations, go to Control Panel - System - Device Manager and click on "Modem". Choose the modem device and click on "Properties". You can change the settings for both comport. For further details, please refer to Trouble-shooting section in Windows 95. Installation on Win 95/OSR2 Platform ===================================== 1. Win95 will automatically detect the MDP3858 PnP Modem Card after which the system will prompt the "Update Device Driver Wizard" dialog box. 2. Insert the installation diskette provided into either drive A or B. 3. Click "Next" to let system search for an updated driver. 4. Click "Finish" to use the found driver. 5. Click "Ok" when prompted to insert the installation disk. 6. Change path to A:\ (or B:\) and click OK. 7. System will then automatically load all the necessary drivers and files needed. You might encounter some resource conflicts after loading the PnP modem device (especially when there are non-Plug & Play adaptors installed in your system). Please refer to Trouble-shooting section in Windows 95 for further details. Modem AT Command Set ==================== The AT Command Instructions Set for the Modem hardware is now available in Microsoft Word format (ATCOMSET.DOC). It is available in the software diskette provided from manufacturer. Things to Note :- ================= 1. MDP3858-E can be set up on both WIN95 and WIN95(OSR2) but no support on WIN3.x and DOS platform. 2. Windows Dos Terminal Emulation is supported. Due to the PCI way of assigning IRQ to the Modem, please do not use old DOS applications in WIN95 Dos Emulation Box. Try to use Up-To-Date DOS applications such as PROCOMM PLUS - Version 2.0 etc. To setup DOS Box support, please check the DOS Support Box under Modem Properties for this feature. 3. Voice and SpeakerPhone are not supported. *********************************************************** * In case you encounter any problem with our products, * * please quote the following model(s) when calling our * * Technical Support : * * MDP3858-E Modem Card * *********************************************************** ------- The End ---------