Dear Imation SuperDisk Parallel Port Drive User:

---------------------------------------------------------------------
Helpful Hints When Running Imation's Performance Accelerator (PA)
for Windows 95


Explorer Copy vs. Move

When using Explorer to transfer files to the SuperDisk drive it is 
STRONGLY recommended that files be copied rather than moved.

---------------------------------------------------------------------

Known Issues with Imation's Performance Accelerator for Windows 95.


Drive Letter Assignments

The drive letter for the SuperDisk drive which is detected and shown during
installation of the Performance Accelerator software must not be changed or 
the software will not operate correctly.  If you want to change your drive 
letter: un-install the SuperDisk Accelerator, change the drive letter, and 
then re-install the Performance Accelerator software.


User Profiles

If User Profiles are enabled on your machine, the Performance Accelerator 
software will only run for the profile in which it was installed.  In order 
to run the Performance Accelerator software on other Profiles, please do 
the following for each Profile:

From the directory C:\PROGRAM FILES\IMATION\PA, copy the file 
SD120ACCELERATOR.EXE to the StartUp folder.  You can open the StartUp folder 
by right clicking on the Start Menu and selecting Open.  Open the Programs 
folder.  The StartUp folder will now be visible. 


Media Full Message

If you are trying to write files to the SuperDisk drive which exceed the 
diskette's remaining capacity, you will be prompted to "insert a new disk to 
continue".  You will not be able to eject the disk until all the files have 
been flushed from the hard drive which have not been written to the SuperDisk
diskette.


Laptop Users

Do not "suspend" your computer until all files have been written to the 
SuperDisk drive.  Suspending the computer before files are flushed will 
result in lost files.


Compressed Media

If you are copying files to a compressed SuperDisk diskette which exceeds the 
diskette's remaining uncompressed capacity, it is recommended that you disable 
staging and write the files directly to the diskette.  This will avoid media 
full messages.  You can do this by right clicking on the Super Disk icon in the 
System Tray and selecting Staging Disabled.


Conflict With Tape-It Software

If you have Tape-It software version 1.22A or earlier installed on your computer
system, please do not install the Performance Accelerator software.  Contact 
Imation technical support (see Installation Guide for Imation contact information) 
for an updated version of Tape-It software.