Windows 98

   Introduction:
   -------------
   This document describes the procedure to install Windows 98 driver for
   D-Link DRN-16CT Ethernet ISA Bus Adapter.

   Location of Driver:     \WIN98\DRN16CT.SYS   NDIS 3 Mini-Port DRIVER

   Installing driver procedure on Microsoft Windows 98:
   -----------------------------------------------------
   
  Before starting with the installation process, make sure that the adapter
  is properly installed and configured.

   1.If Windows 98 has built the driver for D-Link DRN-16CT, when you plug
     the D-Link DRN-16CT in the mother board and power on the Windows 98, 
     the Window 98 will install the driver of D-Link DRN-16CT automatically.

     You will see there is an item:
     
        "Realtek RTL8019 PnP LAN adapter or compatible"

     in the 'Network adapters' list in the Device Manager.

     The Device Manager can be invoked by choosing Start\Setting\
     Control PanelSystem \Hardware (Tag)\Device Manager (button)

   2.Invoke the Device Manager. Right click the item

         "Realtek RTL8019 PnP LAN adapter or compatable"

     in the 'Network adapters' list, and choose Properties.
     There will prompt the Realtek RTL8019 PnP LAN adapter or compatable
     Properties window.

   3.Click the 'Driver' tag, and choose the 'Update Driver' button.
     There wll prompt a Update Device Driver Wizard window.
     Click 'Next'.

   4.The Wizard will ask you
     What do you want window to do?
     Please choose
       Display a list of all the drivers in a specific location so you can 
       select the driver you want.
     Click 'Next', it will prompt a 'Select Device' window.

   5.Click 'Have Disk'.
     In 'Install From Disk' window, type the following path in the combo 
     list:

            A:\WIN98

     Click 'OK'.

   6.There will show :

     Windows driver file search for device 
           
     "D-Link DRN-16CT Ethernet ISA Bus Adapter"

     Location of driver:

     B:\WIN98\NETDRN16.INF
     
     Click 'Next'.

   7.Windows 98 will copy the driver and system files for the network.
    
   8.Finish the 'Update Driver', and the updated driver will work for
     D-Link DRN-16CT.

   9.You will see

        "D-Link DRN-16CT Ethernet ISA Bus Adapter"

     in the 'Network adapters' list.