Windows 95

   Introduction:
   -------------
   This document describes the procedure to install  Windows 95
   driver for D-Link DRN-16CT Ethernet ISA Bus Adapter.

   Location of Driver:     \WIN95\DRN16CT.SYS   NDIS 3 Mini-Port DRIVER
                           \WIN95\DRN16.DOS   NDIS 2 DRIVER

   Installing driver procedure on Microsoft Windows 95 :
   -----------------------------------------------------
      Windows 95 is the operation system with PnP feature. If you set
      the  adapter in  PnP mode,  Windows 95  will  auto-detect your
      adapter configuration and set it.  The user don't need to do anything
      for the adapter configuration.

      Executing Windows 95, it will auto-detect your system configuration
      then find the adapter hardware.

      To have the resource's conflict-free feature,you should install the
      driver from the distribution disk instead of the systems's NE2000
      driver.

      1. There will show a "New Hardware Found" dialog box and ask you to
         select which driver you want to install, select "Driver from disk
         provided by hardware manufacturer".
         Click 'OK'.

      2. Insert the D-Link DRN-16CT driver diskette into drive A and specify
         the driver pathname A:\WIN95 .

      3. Windows 95 will appear some messages to insert Windows 95 system
         disk to complete setup steps.

      4. Windows 95 will finish the other installation procedure
         automatically, then you restart the system.