LAN Server 4.0

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on
   OS/2 LAN Server 4.0 for D-Link DRN-16CT Ethernet ISA Bus Adapter.

   Location of Driver: \NDIS2\OS2\DRN16.OS2  (for OS/2 LAN Server)

   Installing driver procedure on OS/2 LAN Server 4.0:
   ---------------------------------------------------
      Before you start with the installation process, make sure that
      OS/2 LAN Server is properly installed. Similarly, your adapter
      should also be properly installed in your server.

      1. In OS/2 window, Click the "MPTS" icon.

      2. The screen will display the IBM Log, press "OK".

      3. Select "Install" button.

      4. Insert the D-Link DRN-16CT driver diskette, specify the driver
         path A:\NDIS2\OS2 and press <Enter>.

      5. When complete above step to load DRN16.OS2 into OS/2 system,
         then configure your system.

      6. The same step as step 3, select "Configure" button.

      7. The screen will display "Configure" dialog box and select "LAN
         adapters and protocols" then press "configure" button.

      8. The screen will display "LAPS Configuration" dialog box, move
         highlight to "D-Link DRN-16CT Ethernet ISA Bus Adapter" item in
         "Network Adapter" window, and select "NetBios" protocol.
         Press "OK".

      9. Installation is complete now. Shutdown and restart your PC.