OS/2 LAN Requester

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on
   OS/2 LAN Requester for D-Link DRN-16CT Ethernet ISA Bus Adapter.

   Location of Driver: \NDIS2\OS2\DRN16.OS2  (for OS/2 LAN Requester)


   Installing driver procedure on OS/2 LAN Requester:
   ---------------------------------------------------
      Before you start with the installation process, make sure that
      OS/2 LAN Requester  is properly installed. Similarly, your adapter
      should also be properly installed in your PC.

      1. In OS/2 window, Click the "MPTS" icon.

      2. The screen will display the IBM Log, press "OK".

      3. Select "Install" button.

      4. Insert the D-Link DRN-16CT driver diskette, specify the driver
         path A:\NDIS2\OS2 and press <Enter>.

      5. When complete above step to load DRN16.OS2 into OS/2 system,
         then configure your system.

      6. The same step as step 3, select "Configure" button.

      7. The screen will display "Configure" dialog box and select "LAN
         adapters and protocols" then press "configure" button.

      8. The screen will display "LAPS Configuration" dialog box, move
         highlight to "D-Link DRN-16CT Ethernet ISA Bus Adapter" item in
         "Network Adapter" window, and select "NetBios" protocol.
         Press "OK".

      9. Installation is complete now. Shutdown and reset your PC.