Netware Driver Installation Overview For Ethernet PCMCIA Adapter This directory contains Ethernet DOS ODI driver PCMMLID.COM that supports NetWare 3.x and 4.0, NetWare Lite and other ODI interface application. PCMMLID.COM : DOS/ODI Driver for NetWare 3.x and 4.0. The following instructions let you to install Novel NetWare Ver. 386 DOS ODI Driver : 1. Things You Need ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Before you start with the installation process make sure you have the following : a. Ethernet PCMCIA Hardware Driver Disk. b. Novell DOS ODI WORKSTATION SERVICES diskette(WSGEN). 2. How To Install ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ You need following five files to install DOS ODI DRIVER. a. LSL.COM ---- supported by Novell b. PCMMLID.COM ---- Novell DOS ODI Driver ,supported by manufacturer c. IPXODI.COM ---- supported by Novell d. NETx.COM ---- supported by Novell or EMSNETx.EXE or XMSNETx.EXE e. NET.CFG ---- optional,configuration file After boot your workstation, type following comments on the console: LSL PCMMLID IPXODI NETx then,you can log in to the file server. Normally, you will need a NET.CFG file to configure your Ethernet PCMCIA card. You can see Netware 386 Installation appendix E for more information about NET.CFG. Below is a sample NET.CFG file: LINK DRIVER PEMLID port 300 int 5 Frame Ethernet_II Frame Ethernet_802.3 Protocol IPX 0 Ethernet_802.3 : : ----the end---- ======================================================================= Novell, NetWare, Novell Advanced NetWare are registered trademarks of Novell Incorporated. Ethernet is registered trademark of Xerox Corporation. Other trademarks orbrand names unintentionally omitted are trademarks or registered trademarks of their respective companies. =======================================================================