Driver Installation - Artisoft's LANtastic v6.0 Driver
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

  Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter

  Artisoft's LANtastic Network Software v6.0 Driver
  INSTALLATION GUIDE


=============================================================================
CONTENTS
=============================================================================

*  Important Considerations

*  Files Provided

*  Device Driver Installation Guide

*  Sample File Contents After Installation

=============================================================================
IMPORTANT CONSIDERATIONS
=============================================================================

*  This driver supports the Siemens OfficeLAN PCI 10/100 TX Fast Ethernet
    Adapters.

*  This driver conforms to the Network Driver Interface Specification (NDIS)
    v2.0.1 defined by Microsoft/3Com. The driver has been tested with
    Microsoft LAN Manager, 3Com 3+Open, IBM LAN Server, IBM PC LAN
    Program, DEC Pathworks, and other NDIS-compatible network operating
    systems and protocol stacks.

*  The PROTOCOL.INI file contains configuration information.

=============================================================================
FILES PROVIDED
=============================================================================

*  L100.DOS           DOS NDIS2 driver
*  PROTOCOL.INI       Driver operational parameters and binding information

=============================================================================
DEVICE DRIVER INSTALLATION GUIDE
=============================================================================

The following instructions describe how to install Artisoft's LANtastic
Network Software v6.0 with the our driver file. If Artisoft's LANtastic
Network Software v6.0 is installed and you want to install just the our
driver, skip this section and go to "Installing the LCI Driver Only".

* Installing Artisoft's LANtastic Network Software v6.0 and the our Driver

This procedure describes installing Artisoft's LANtastic Network Software
v6.0 together with the driver files. It is designed to expedite the driver
installation.

1.  Edit the PROTOCOL.INI file you copied from diskette to read as follows:

     [L100_NIF]
      Drivername = L100$

2.  Insert the Artisoft's LANtastic Network Software v 6.0 Disk 1 of 4 in
     your computer floppy drive.

3.  Type:  A:\INSTALL

4.  Press [Enter].

5.  Follow the screen prompts until the Select Network Adapter Window
     prompts you for a LAN driver.

6.  When the Select Network Adapter Window prompts you for a LAN
     driver, select "NDIS Support for Network Adapters", then select OK.

7.  When the program prompts you for the driver diskette, insert the
      ConfigDisk in your computer floppy drive.

8.   Specify the path for the modified PROTOCOL.INI on the ConfigDisk.

9.  Select OK.

10. Continue with the LANtastic Network Software v6.0 driver installation
      procedure until completed.

11. Reboot your system.


* Installing the our Driver Only

The following instructions assume that Artisoft's LANtastic Network
Software v6.0 is already installed. The procedure installs the our driver
only.

If you are using Artisoft's LANtastic Network Software v6.0 and
want to install the our driver:

1.  Double-click on the Control Panel icon in the Main window.

2.  Double-click on the Network icon.

3.  In the Options area, select the Adapters icon.

4.  If you need to remove an adapter, select that adapter, then select
     "Remove". When a message asks if you are sure you want to remove
     the adapter, select "Yes".

5.  Select "Add".

     The Install Network Adapter dialog box appears.

6.  Select the our adapter you want to install, then select "OK".

     The Install Driver dialog box appears.

7.  Type the path of the driver (for example, A:\NDIS\DOS), then select "OK".

     The Unlisted or Updated Network Adapter dialog box appears.

8.  Select "OK" when each of the next two dialog boxes appear.

9.  Select "Close".

     The Network Settings dialog box appears.

10. Select "OK".

      You are prompted whether you want to accept the options you selected
       and restart your computer, or return to DOS.

11. Restart your computer so these options take effect.

=============================================================================

This software and documentation have restricted rights: their use, duplication,
or disclosure by the Government is subject to the restrictions in:

*  DFARS 252.227-7013
    Subparagraph (c) (1) (ii)
    Rights in Technical Data and Computer Software clause

*  FAR 52.227-14
    Alternate III
    Rights in Data -- General clause

*  FAR 52.227-19
    Subparagraphs (c) (1) and (2)
    Commercial Computer Software -- Restricted Rights clause



Other product and company names are registered trademarks or trademarks of
their respective holders.