Driver Installation - Novell LAN WorkPlace for DOS ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter Novell LAN WorkPlace v4.0 for DOS Driver INSTALLATION GUIDE ============================================================================= CONTENTS ============================================================================= * Important Considerations * System Requirements * Files Provided * Hardware Installation Guide * Device Driver Installation Guide * Modifying Line Speed ============================================================================= IMPORTANT CONSIDERATIONS ============================================================================= * For custom installations (multiple frame types), refer to your Novell NetWare ODI Shell for DOS manual. ============================================================================= SYSTEM REQUIREMENTS ============================================================================= Hardware Requirements: * IBM-compatible personal computer (PC), 80486 or higher with PCI bus supporting bus master mode Firmware Requirements: * Fully compliant Rev. 2.0 or higher PCI BIOS supplied with the PC Software Requirements: * MS-DOS v3.0 or higher * Novell IPXODI (provided on the ConfigDisk) * Novell LSL (v2.11 or higher, provided on the ConfigDisk) * Novell NETX or Novell VLM (provided on the ConfigDisk) ============================================================================= FILES PROVIDED ============================================================================= The Novell NetWare DOS ODI client directory includes: * L100.COM Novell NetWare ODI Client driver * NET.CFG Novell network configuration file for the driver ============================================================================= HARDWARE INSTALLATION GUIDE ============================================================================= * See the User Guide for complete installation instructions. * When installing the Adapter in a PCI computer, make sure the slot you select supports bus master operations. * No specialized setup is necessary for motherboards with automatic PCI parameterization (most new PCs support it). * For motherboards with bus master jumpers and interrupt jumpers for PCI slots: 1. Using the appropriate motherboard jumper, enable bus master operations for the selected PCI slot. 2. Using the appropriate motherboard jumper, select the interrupt to the selected PCI slot. 3. Using your computer setup menu: * Enable the bus master on the PCI slot. * Enable I/O on the PCI slot. * Define the interrupt number on the PCI slot. ============================================================================= DEVICE DRIVER INSTALLATION GUIDE ============================================================================= 1 Copy the DOS ODI driver related files into the proper directory. 2. Insert the LAN WorkPlace v4.0 for DOS Install diskette into the floppy drive. 3. Move to the drive where you inserted the diskette. 4. Type: INSTALL [Enter] 5. Select a target drive and press [Enter]. 6. When the program asks if you want to install the Windows application portion of LAN WorkPlace, select either "Yes" or "No" (the choice is not applicable to your adapter installation). 7. Ask your System Administrator to give you the appropriate IP information, such as IP address, router address, and subnet mask. 8. Press [Enter] to continue the installation. 9. Follow the prompts until asked if you want to update your system files. Use the information from Step 7, or see "Installing and Configuring the Software" in your Novell LAN WorkPlace for DOS User Guide. 10. When prompted to update your system files, select YES. The program automatically creates a backup of your DOS system files if they already exist. 11. Follow the prompts to copy the remaining LAN WorkPlace for DOS files until you finish the installation. 12. Exit to DOS. 13. Edit the NET.CFG file so that the line speed, cable type, network protocol type settings are correct for your network. You do not need to specify a PCI slot number or Interrupt number. If you do specify the slot number: * PCI slots are counted from 0--that is, the first PCI adapter installed is considered to be in slot 0, the next in slot 2, and so on. The example that follows shows what the NET.CFG file should look like. Lines preceded with > indicate text you must add to the NET.CFG file. Lines preceded with # (the remark or REM character) are not executed. Removing the # character activates these lines when you reboot. * * * * * * * * * * * * * * * * * * * * * * * * * * NOTE: The following lines must be left-justified in your NET.CFG file (do not precede them with the > character; this character only marks what you must type in the NET.CFG file): Link Support Link Driver L100 Protocol TCPIP All other lines must be indented. * * * * * * * * * * * * * * * * * * * * * * * * * * In the example, no values appear next to the parameters in the Protocol TCPIP section; however, you will see values next to the parameters in the Protocol TCPIP section of your NET.CFG file. Do not change these values. # # NET.CFG File for L100 # > Link Support > Buffers 8 1586 > MemPool 4096 Link Driver L100 Frame Ethernet_802.3 > Frame Ethernet_II # Port #1 280 # Mem #1 000D0000 2000/10 # Int #1 3 # PS/2 Slot? # Protocol TCPIP > Bind L100 ip_address ip_router ip_netmask tcp_sockets udp_sockets raw_sockets nb_sessions nb_commands nb_adapter nb_domain 14. Save the NET.CFG file. 15. Reboot your computer. ============================================================================= This software and documentation have restricted rights: their use, duplication, or disclosure by the Government is subject to the restrictions in: * DFARS 252.227-7013 Subparagraph (c) (1) (ii) Rights in Technical Data and Computer Software clause * FAR 52.227-14 Alternate III Rights in Data -- General clause * FAR 52.227-19 Subparagraphs (c) (1) and (2) Commercial Computer Software -- Restricted Rights clause Other product and company names are registered trademarks or trademarks of their respective holders.