Driver Installation - IBM PC LAN Program Environment ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter IBM PC LAN Program Environment INSTALLATION GUIDE ============================================================================= CONTENTS ============================================================================= * Important Considerations * Files Provided * Device Driver Installation Guide ============================================================================= IMPORTANT CONSIDERATIONS ============================================================================= * This driver supports the Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter. * This driver conforms to the Network Driver Interface Specification (NDIS) v2.0.1 defined by Microsoft/3Com. The driver has been tested with Microsoft LAN Manager, 3Com 3+Open, IBM LAN Server, IBM PC LAN Program, DEC Pathworks, and other NDIS-compatible network operating systems and protocol stacks. * Make sure that the adapter line speed matches the speed of the hub to which it is attached. * The PROTOCOL.INI file contains configuration information. ============================================================================= FILES PROVIDED ============================================================================= * L100.DOS DOS NDIS2 driver * PROTOCOL.INI Driver binding information and operational parameters ============================================================================= DEVICE DRIVER INSTALLATION GUIDE ============================================================================= The following instructions are for installing the PC LAN program on a workstation. The section after this gives instructions for installing PC LAN on a server. Both procedures use the LAN Support Program (LSP) for the installation process. * Installing PC LAN on a Workstation 1. At the DOS prompt, insert the IBM LAN Support Program (LSP) v1.3x diskette. 2. Type: DXMAID 3. Press [Enter] three times. The Environment Information screen appears. 4. Specify the values that follow for the fields on this screen. Use the spacebar to cycle through the available options for each field. For LSP v1.30 and v1.33: Configuration for this computer? Yes Use existing configuration information? No Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Source for LSP A:\ Target for new configuration C:\LSP For LSP v1.35: Are you updating an existing configuration? No Do you have driver diskettes? Yes Target for LSP: C:\LSP CONFIG.SYS to update: C:\CONFIG.SYS AUTOEXEC.BAT to update: C:\AUTOEXEC.BAT 5. Press [Enter] to accept these selections. The program prompts you to install the "option" diskette. 6. Insert the ConfigDisk in your floppy drive and specify the path: A:\NDIS\DOS 7. Press [Enter]. The files are copied from the ConfigDisk to the target directory on the hard disk. 8. For LSP v1.30 and v1.33 users, press [Enter] two times. For LSP v1.35 users, press [Enter] once only. The files are copied from the ConfigDisk tothe target directory on the hard disk. 9. When prompted, re-insert the LSP diskette and press [Enter]. The Current Configuration screen appears with : "Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter" 10. Press [F4]. LSP is installed. 11. Use a text editor to edit the CONFIG.SYS file, specifying at least 20 files in the FILES= line. Example: files=20 12. Save your CONFIG.SYS file and reboot your system. 13. If you are using DOS v5.0 or later, type at the DOS prompt: SETVER CIP_MAIN.EXE 5.00 14. Press [Enter]. 15. Reboot your system. 16. Insert the PC LAN Install diskette in your computer floppy drive. 17. Type: INSTALL 18. Press [Enter]. 19. Press [Enter]three more times. 20. Select the function level for the workstation: Base Services Only Extended Services In most cases you will select "Extended Services". 21. Specify "Workstation". 22. Specify one of the following options: Send messages Send, receive, and log messages In most cases you will select "Send, receive, and log messages". 23. Specify the target path for the PC LAN files. The default is C:\DOS. 24. Specify the machine ID and the domain ID. The domain ID must be the domain server ID, and it must be the same for all workstations on the network. 25. Follow the prompts to complete the installation until you reach the Change System Configuration File screen. Usually, you should accept the default for the system configuration file. The Change System Batch File screen appears. Usually you should accept the default. * Installing the PC LAN Program on a Server The following section provides instructions for installing PC LAN on a server. This procedure uses the LAN Support Program (LSP) for the installation process. 1. At the DOS prompt, insert the LSP diskette. 2. Type: DXMAID 3. Press [Enter]. 4. Press [Enter] twice. The Environment Information screen appears. 5. Specify the values that follow for the fields on this screen. Use the spacebar to cycle through the available options for each field. Configuration for this computer? Yes Use existing configuration information? No Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Source for LSP A:\ Target for new configuration C:\LSP 6. Press [Enter] to accept these selections. The program prompts you to install the "option" diskette. 7. Insert the ConfigDisk in your floppy drive and specify the path: A:\NDIS\OS2. 8. Press [Enter]. The files are copied from the ConfigDisk to the target directory on the hard disk. 9. Press [Enter] three times. 10. When prompted, re-insert the LSP diskette and press [Enter]. The Current Configuration screen appears with the Ethernet adapter and protocols already selected. 11. Press [F4]. LSP is installed. 12. Use a text editor to edit the CONFIG.SYS file, specifying at least 20 files in the FILES= line. Example: files=20 12. Save your CONFIG.SYS file and reboot your system. 13. Insert the PC LAN Install diskette in your computer floppy drive. 14. Type: INSTALL 15. Press [Enter]. 16. Press [Enter] three more times. 17. Select the function level for the workstation: Base Services Only Extended Services In most cases you will select "Extended Services". 18. Specify "Server". 19. Specify one of the following options: Send messages Send, receive, and log messages In most cases you will select "Send, receive, and log messages". 20. Specify the target path for the PC LAN files. The default is C:\DOS. 21. Specify the machine ID and the domain ID. The domain ID must be the domain server ID, and it must be used by all workstations on the network to communicate with the server. 25. Follow the prompts to complete the installation until you reach the Change System Configuration File screen. Usually, you should accept the default for the system configuration file. The Change System Batch File screen appears. Usually you should accept the default. ============================================================================= This software and documentation have restricted rights: their use, duplication, or disclosure by the Government is subject to the restrictions in: * DFARS 252.227-7013 Subparagraph (c) (1) (ii) Rights in Technical Data and Computer Software clause * FAR 52.227-14 Alternate III Rights in Data -- General clause * FAR 52.227-19 Subparagraphs (c) (1) and (2) Commercial Computer Software -- Restricted Rights clause Other product and company names are registered trademarks or trademarks of their respective holders.