Driver Installation - IBM LAN Server DOS Requester ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter IBM LAN Server v2.0 and v3.0 DOS Requester INSTALLATION GUIDE ============================================================================= CONTENTS ============================================================================= * Important Considerations * Files Provided * Device Driver Installation Guide Automatic Installation Using IBM LAN Support Program (LSP) Manual Installation * Device Driver Installation Guide For LAN Server 4.0 DOS LAN Requester ============================================================================= IMPORTANT CONSIDERATIONS ============================================================================= * This driver supports the Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter. * This driver conforms to the Network Driver Interface Specification (NDIS) v2.0.1 defined by Microsoft/3Com. The driver has been tested with Microsoft LAN Manager, 3Com 3+Open, IBM LAN Server, IBM PC LAN Program, DEC Pathworks, and other NDIS-compatible network operating systems and protocol stacks. * The PROTOCOL.INI file contains configuration information. ============================================================================= FILES PROVIDED ============================================================================= * L100.DOS DOS NDIS2 driver. * L100.NIF Network information file. * PROTOCOL.INI Driver operational parameters and binding information file. ============================================================================= DEVICE DRIVER INSTALLATION GUIDE For LAN Server 2.0 or 3.0 ============================================================================= 1. At the DOS prompt, insert the IBM LAN Support Program (LSP) v1.3x diskette into your floppy drive. 2. Type: DXMAID 3. Press [Enter] three times. The Environment Information screen appears. 4. Specify the values that follow for the fields on this screen. Use the spacebar to cycle through the available options for each field. For LSP v1.30 and v1.33: Configuration for this computer? Yes Use existing configuration information? No Do you have adapter option diskettes? Yes Are you configuring for two adapters? No Source for LSP A:\ Target for new configuration C:\LSP For LSP v1.35: Are you updating an existing configuration? No Do you have driver diskettes? Yes Target for LSP: C:\LSP CONFIG.SYS to update: C:\CONFIG.SYS AUTOEXEC.BAT to update: C:\AUTOEXEC.BAT 5. Press [Enter] to accept these selections. The program prompts you to install the "option" diskette. 6. Insert the ConfigDisk in your floppy drive and specify the path: A:\NDIS\DOS 7. Press [Enter]. The files are copied from the ConfigDisk to the target directory on the hard disk. 8. For LSP v1.30 and v1.33 users, press [Enter] two times. For LSP v1.35 users, press [Enter] once only. The files are copied from the ConfigDisk to the target directory on the hard disk. 9. When prompted, re-insert the LSP diskette and press [Enter]. The Current Configuration screen appears with "Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter". 10. Press [F4]. LSP is installed. 11. Use a text editor to edit the CONFIG.SYS file, specifying at least 20 files in the FILES= line. Example: files=20 12. Save your CONFIG.SYS file and reboot your system. 13. If you are using DOS v5.0 or later, type at the DOS prompt: SETVER CIP_MAIN.EXE 5.00 14. Press [Enter]. 15. Reboot your system. 16. Insert the DOS LAN Requester Install diskette in your floppy drive. 17. Type: INSTALL 18. Press [Enter] three times. The program prompts you for the pathname of the DOS LAN Requester directory. 23. Specify the target path for the DOS LAN Requester files. The default is C:\DOS. 24. Press [Enter]. The program asks which services you require. 25. Highlight one of the following options: Send messages Send, View, Edit, and Log messages In most cases you select "Send, View, Edit, and Log messages". 26. Press [Enter]. 27. Specify the workstation ID and the domain ID. The domain ID must be the domain server ID, and it must be the same for all workstations on the network. 28. Follow the screen prompts to complete the installation. ============================================================================= DEVICE DRIVER INSTALLATION GUIDE For LAN Server 4.0 ============================================================================= Before starting the installation processes, make sure that DOS LAN Services is properly installed. 1. Copy L100.DOS from released diskette (A:\NDIS\DOS) to DOS LAN Services subdirectory C:\NET. 2. Under DOS LAN Requester subdirectory C:\NET, run INSTALL. 3. Go to "Network Card", and press 4. Slect "Change driver for network card." . 5. Select "Network card not shown in list below..". 6. Insert the released floppy diskette, specify pathname A:\NDIS\DOS 7. After installation, reboot your system. ============================================================================= This software and documentation have restricted rights: their use, duplication, or disclosure by the Government is subject to the restrictions in: * DFARS 252.227-7013 Subparagraph (c) (1) (ii) Rights in Technical Data and Computer Software clause * FAR 52.227-14 Alternate III Rights in Data -- General clause * FAR 52.227-19 Subparagraphs (c) (1) and (2) Commercial Computer Software -- Restricted Rights clause Other product and company names are registered trademarks or trademarks of their respective holders.