ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³                      Installation for Windows 95                       ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

  Function:

    1. W940ND.VXD is a NDIS 3.x driver for Windows 95.

       If there exists only one RP-1651W card, the driver will automatically
       get IOBASE and IRQ from PCI Configuration Space.

       If there exists more than one RP-1651W cards, user can indicate a
       specified RP-1651W card by inputing IDs.

    2. W940ND.INF is a Network Setup Information File for Windows 95 Platform.


  Installation:

    1. Load W904ND.VXD and W940ND.INF files into local hard disk.

    2. Click the 'Network' Icon in the Control Panel Group.

    3. Click the 'Add' Buttom in the 'Network' Dialog Box.

    4. Select the 'Adapter' item and click the 'Add' Button in the 'Select
       Network Component' Dialog Box.

    5. Click the 'Have Disk' Button in the 'Select Network adapters' Dialog
       Box.

    6. Type the path name that contains W940ND.VXD and W940ND.INF files and
       click the 'OK' Button.

    7. Press <enter> when the 'RP-1651W PCI Ethernet Adapter' Dialog
       appears.

    8. If more than one RP-1651W cards are install on your computer, select
       a specified RP-1651W card by inputing Ethernet ID.
       Select the 'RP-1651W PCI Ethernet Adapter' item in the 'Network'
       Dialog Box.
       Click the 'Advanced' Button.
       Select the 'Selected Etherent ID' item.
       Type the Ethernet ID.
       Click the 'OK' Button.

    9. Click the 'OK' Button when you finish all installation processes.

    10.Restart your computer.


  Usage:

    1. Boot your computer.

    2. If want to change the setting of early interrupt function of this
       driver, please refer step 2 to step 11 in the Installation section.

    3. If more than one RP-1651W cards are installed on your system, select
       a specified RP-1651W card to load. (refer to step 2 to step
       11 in the Installation section)


  Trouble Shooting:

    1. Message: 'Your network adapter RP-1651W PCI Ethernet Adapter[0000] is
                 not working properly. You may need to set it up again.
                 For more information, see the Network Troubleshooter in
                 Windows Help.'
       Solution: Make sure that your RP-1651W card is plugged into your
                 system.

    2. Condition: The Windows 95 can not boot normally.
       Solution: Make sure that your RP-1651W PCI card is connected to the
                 cable.