*****************************************************************************
*                                                                           *
*                   32-Bit PCI Fast Ethernet Adapter                        *
*                                                                           *
*                     NDIS/4 Driver for Windows 98                          *
*                                                                           *
*****************************************************************************

NDIS/4 Driver Installation for Windows 98
=========================================

  1. Plug adapter into one of the Master PCI slots of your PC.

  2. Turn the PC power ON then boot from Windows 98.

  3. Windows 98 will prompt "PCI Ethernet Controller" in "New Hardware
     Found" dialog box and "Add New Hardware Wizard" dialog box.

  4. Click "Next >" button when "Search for the best for your device.
     [Recommended]" is on.

  5. Insert the Adapter Driver Diskette in your floppy drive.

  6. Click off "Floppy disk drives". Click on the "Specify a location"
     and type "A:\WIN98", then click "Next >" button.

  7. Windows 98 will prompt "32-Bit PCI Fast Ethernet Adapter" in
     "Add New Hardware Wizard" dialog box.

  8. Click "Next >" button and Windows starts to copy files from Windows
     98 CD-ROM to your hard disk.

  9. Click "Finish" button from "Add New Hardware Wizard" dialog box.

 10. Remove the Adapter Driver Diskette from your floppy drive.

 11. Restart your computer to take effect the network function.

----
All trademarks or brand names mentioned are properties
of their respective companies.