AutoLink is using the following configuration values:
       CREATE_LOG_FILE = YES
       AUTO_CONFIGURE = NO
       CONFIGURATION_FILE = 
       RUN_DIAGNOSTICS = NO
       EDIT_CONFIG.SYS = YES
       EDIT_AUTOEXEC.BAT = YES
       EDIT_NET.CFG = YES
       SMARTAGENT_INFO = YES
       3INSTALL_FRAME_TYPE = 
       USER_FRAME_TYPE = 
       CONNECT_TO_SERVER = YES
       TARGET_DIRECTORY = C:\NWCLIENT
       PREFERRED_SERVER = 


AutoLink NetWare client installation is starting......

Searching for a 3Com EtherLink III network NIC (Network Interface Card).

Configuration and Diagnostic Program  Version 3.2
Copyright (C) 1991-1996, 3Com Corporation.  All Rights Reserved.


NIC                            NIC
Number                       Description
--------------------------------------------------------------------------
  1	3Com 3C509B-Combo: Ethernet Address = 0020AF5CC065
   	EtherLink III 16-bit ISA NIC

Starting the NetWare DOS Requester..NetWare Link Support Layer v2.16 (950417)
(C) Copyright 1990-1995 Novell, Inc. All Rights Reserved.

The configuration file used was "C:\AUTOLINK.3CM\NET.CFG".
Max Boards 4, Max Stacks 4


.3Com EtherLink III MLID w/ DME  v2.03 (960721)
(C) Copyright 1995 3Com Corp.  All Rights Reserved

IRQ 10, Port 300, Node Address 20AF5CC065 L
Max Frame 1514 bytes, Line Speed 10 Mbps
Board 1, Frame ETHERNET_802.2, LSB Mode

.
NetWare IPX/SPX Protocol            v3.02  (950808)
(C) Copyright 1990-1995 Novell, Inc.  All Rights Reserved.

Bound to logical board 1 (3C5X9) : Protocol ID E0

.VLM.EXE      - NetWare virtual loadable module manager  v1.20 REV B (951002)
(C) Copyright 1993, 1994, 1995 Novell, Inc.  All Rights Reserved.
Patent pending.

The VLM.EXE file is pre-initializing the VLMs.............
The VLM.EXE file is using extended memory (XMS).
You are attached to server UKO_MISKOLC                                     

VLM.EXE      - NetWare virtual loadable module manager  v1.20 REV B (951002)
(C) Copyright 1993, 1994, 1995 Novell, Inc.  All Rights Reserved.
Patent pending.

The VLM.EXE file has been successfully removed.


IPX protocol has been successfully removed.

3Com EtherLink III MLID w/ DME  v2.03 (960721)
(C) Copyright 1995 3Com Corp.  All Rights Reserved


The 3C5X9 driver has been successfully removed.

NetWare Link Support Layer v2.16 (950417)
(C) Copyright 1990-1995 Novell, Inc. All Rights Reserved.

The LSL has been successfully removed.







ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
AutoLink has completed.  NetWare client software has been installed in your  
C:\NWCLIENT directory.
Your AUTOEXEC.BAT and CONFIG.SYS have been edited to support a NetWare client.
Your old files have been copied to AUTOEXEC.3CM and CONFIG.3CM.
Your NIC can now be managed remotely via SNMP with 3Com's Transcend.

  ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
  º                                                                       º
  º                          You Are Done!                                º
  º                                                                       º
  º              If you are a new user, contact your system               º
  º              administrator for a user name and password.              º
  º                                                                       º
  º    Exit this program, remove the diskette and reboot the computer.    º
  º                                                                       º
  ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ