Installing The NDIS 3.0 Driver ------------------------------ Installation of PNP Ethernet Card's driver for specific environment is described below. Microsoft Windows NT -------------------- Note: ----- 1) The directory structure provided on the PNP Ethernet Card's driver diskette has been setup for automatic OEM installation. Also, more information can be found in the Microsoft Windows NT User's Guide. 2) Only x86-based Windows NT platforms are supported. 3) This WINNT driver is not supported for Microsoft Windows NT 3.1. 4) For Windows NT 3.5 / 3.51 / 4.0 installation, specify the driver source path to the following : \WINNT Follow the steps listed below: ------------------------------ 1 Insert the PNP Ethernet Card's driver diskette into the floppy drive. 2 From the "Control Panel" in the "Windows NT Main" window, double click on the "Network" icon to install the PNP Ethernet Card. 3 In the "Network Settings" dialog box, choose "Add Adapter". 4 In the "Add Network Adapter" dialog box, pull down the adapter card list menu and select " Requires disk from manufacturer" from the list and continue. 5 In the next window, enter: A:\WINNT 6 Then, select PNP Ethernet Card from the dialog box to install the PNP Ethernet Card. 8 Reboot your system to complete the driver installation process. For additional information, please refer to your Microsoft Windows NT OS documentation. -------------------------------------[END]--------------------------------------