Windows XP
  
  Introduction:
  -------------
  This document describes the procedure to install Windows XP driver
  for D-Link DGE-528T Gigabit Ethernet Adapter.
  
  Location of Windows XP Driver : \WINXP\DLKRTGB.SYS
  
  Installing driver for Windows XP :
  -------------------------------------------------------------------
  Before you start with the installation process, make sure that your
  adapter should be properly installed in your PCI bus slot.
  Executing Windows XP, it will auto-detect your system configuration and
  find the adapter hardware.
  (If Windows XP does not prompt that it detects the Ethernet Controller,
  there must be something wrong with the DGE-528T Gigabit Ethernet
  adapter or your system enviroment.)
  
  1. Ask you to select which driver you want to install, select "Install from
  a list or specific location(Advanced)".
  
  2. Insert the DGE-528T Windows driver disk and specify the setup file
  pathname, Ex: D:\WINXP.
  
  3. The Windows XP will start to copy the drivers into the system.
  
  4. Windows XP will finish the other installation procedure automatically.