Netware Client32 Driver for DOS/Windows 3.1x Introduction: ------------- This document describes the procedure to install the NetWare Client32 driver for D-Link DGE-528T Gigabit Ethernet Adapter. Location of Driver: \NWCLIENT\CLIENT32\DGE528.LAN Sample Configuration Files: --------------------------- STARTNET.BAT (Client 32 for DOS will contain): C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\DGE528.LAN FRAME=ETHERNET_802.2 LOAD C:\NOVELL\CLIENT32\DGE528.LAN FRAME=Ethernet_802.3 LOAD C:\NOVELL\CLIENT32\DGE528.LAN FRAME=Ethernet_II LOAD C:\NOVELL\CLIENT32\DGE528.LAN FRAME=Ethernet_SNAP A. Driver Installation Procedures on Clien32 for DOS : ------------------------------------------------------ 1.If you have completed installed the Netware Client 32 for DOS, all you have to do is to modify STARTNET.BAT. Please see the sample STARTNET.BAT above. If not, Please follow the next step 2 - step 7. 2.Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from Netware 4.11 CD). When the product manual appears, mark the "Netware Client 32 for DOS" item, then press . 3.Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu, then press . 4.Insert DGE-528T Driver Diskette, then specify the path on your system. 5.Select "D-Link DGE-528T Gigabit Ethernet Adapter" then press . 6.Following instructions to complete the Client32 for DOS software installation. 7.Reboot your machine. Installation Notes: ------------------- 1.Installing Multiple LAN Adapters: The keyword "SLOT" is provided for multiple LAN adapters in a single server by the driver DGE528.LAN. So, add EtherID in LOAD commands. For example: C:\NOVELL\CLIENT32\NIOS.EXE LOAD LSLC32.NLM LOAD CMSM.NLM LOAD ETHERTSM.NLM LOAD DGE528 FRAME=Ethernet_802.2 SLOT=1 LOAD DGE528 FRAME=Ethernet_802.2 SLOT=2 2. The keyword "MEDIUMTYPE" is provided for specifying adapter's speed (10M/100M/1000M), add MEDIUMTYPE in LOAD commands. For example: MEDIUMTYPE=AUTO ----> Auto negotiation MEDIUMTYPE=1000FULL ----> 1000M FullDuplex MEDIUMTYPE=100FULL ----> 100M FullDuplex MEDIUMTYPE=100HALF ----> 100M HalfDuplex MEDIUMTYPE=10FULL ----> 10M FullDuplex MEDIUMTYPE=10HALF ----> 10M HalfDuplex LOAD DGE528 FRAME=Ethernet_802.2 MEDIUMTYPE=AUTO B. Driver Installation Procedures on Client32 for Windows 3.x : --------------------------------------------------------------- Refer to Content A. On step 2, mark "Netware Client 32 for DOS" and "Client 32 for Windows". On step 4, specify the path on your system. Like \NWCLIENT\CLIENT32\DGE528.LAN , then following step 3..7 to complete the installation.