LAN Server 4.0
---------------

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on DOS
   LAN Services for ISA Ethernet Card.

   Location of Driver:  \NDIS.DOS\E200ND.DOS  (for DOS LAN Services)


   Installing driver procedure on DOS LAN Requester :
   --------------------------------------------------
      Before you start with the installation  process,  make sure that
      DOS LAN Services is properly installed.  Similarly, your adapter
      should also be properly installed in your client PC.

      1. Copy E200ND.DOS from your Driver diskette (A:\NDIS.DOS\) to DOS
         LAN Services subdirectory C:\NET .

      2. Under DOS LAN Requester subdirectory C:\NET, run INSTALL

      3. The  screen  display  some description. If it's correct, move
         highlight to "The listed options are correct" item ,then press
         ENTER.

      4. Move highlight to "Network Card", then press ENTER.

      5. Select "Change driver for network card." item, then press ENTER.

      6. Select "Network card not shown in list below..", then press ENTER.

      7. Insert the ISA Ethernet Card Driver diskette in floppy A,and specify
         the pathname A:\ ,then press ENTER.

      8. ISA Ethernet Card driver is now installed on your computer, reboot
         your computer.

----------------------------------[ END ]-------------------------------------