Novell NetWare DOS ODI Client 
-----------------------------

Driver Installation From The Command Line Prompt


Note : To use A:\DOSODI\NW4X\E200NW.COM for Novell NetWare Client site, the
       version of LSL.COM file must be v2.11 or higher.
 

Follow the steps listed below:

1       Insert the ISA Ethernet Card driver diskette into the floppy drive.

2       Create a subdirectory in your client's main boot drive with the
        following  files:

         LSL.COM       Link Support Layer
         E200NW.COM    ISA Ethernet Card NetWare DOS ODI Client driver
         IPXODI.COM    An IPX protocol stack file (e.g., IPXODI.COM)
         NETX.EXE      NetWare Shell (used with conventional memory
                       workstations)
         NET.CFG       Optional (used for configuring options different from
                       the default settings). See Novell NetWare
                       Operating  System Keywords section.

        The (NETX.EXE), (LSL.COM), and (IPXODI.COM) files can be obtained
        from the Workstation Driver Diskette in the Novell Client Software
        Package  or from CompuServe. Copy the ISA Ethernet Card client driver 
        E200NW.COM  from the DOSODI directory of the ISA Ethernet Card driver
        diskette to the appropriate sub-directory. To do this, copy the file
        using the path:

                A:\DOSODI\NW3X or A:\DOSODI\NW4X

3       To manually load these files from the DOS prompt, type the following
        commands in the given order to initialize DOSODI driver support and
        the IPX protocol stack:

                LSL.COM                 Followed by <Enter>
                E200NW.COM              Followed by <Enter>
                IPXODI.COM              Followed by <Enter>
                NETX.EXE                Followed by <Enter>

        Note:
        NETX.EXE is compatible with DOS versions 3.x, 4.x, 5.x, and 6.x.
        If you are use DOS 6.2 or higher,please install Netware DOS
        requester.(VLM)

4       To automatically load these files, use a DOS text editor to create
        and/or  modify an(AUTOEXEC.BAT)file. Load the files in the following
        order:

       1)  link support layer, 2) LAN driver, 3) protocol stacks, and 4) the
        shell. The (AUTOEXEC.BAT) file should look similar to the following:

                \<sub-directory>\LSL
                \<sub-directory>\E200NW
                \<sub-directory>\IPXODI
                \<sub-directory>\NETX

5       If the commands have been added to the autoexec.bat file, reboot the
        workstation. After the commands execute, and if a server is present,
        the workstation will attach to the server and display the server's
        name. Log into the network.

        The installation of the NetWare DOS ODI client driver is now complete.

--------------------------------[ END ]--------------------------------------