*************************************** * * * EZSET.EXE V2.11 * * * *************************************** ISA Ethernet Card Configuration and Diagnostics file ---------------------------------------------------- To configure your ISA Ethernet Card, execute the configuration file,EZSET. A screen menu will guide you to configure the ISA Ethernet Card to fit your compyter system's environment. The following is the configuration parameters. I/O Address : 240h,280h,2c0h,300h,320h,340h,360h IRQ Line : 2(9),3,4,5,10,11,12,15 BOOT ROM Address : C8000h,CC000h,D0000h,D4000h,D8000h,DC000h Data Width : 8 bits or 16 bits; auto sensing by hardware Before you install the drivers and connect the ISA Ethernet Card to the network, make sure to run the diagnostics to assure the proper function of the ISA Ethernet Card. The diagnostics includes two groups of test : 1. Card initialization and loopback test This test performs the function of verifying the components, connectors, and circuitry. 2. Network test This test performs the data transmission and reception of the adapter. A screen menu provides you with the instructions to conduct this test. ------------------------------------[END]---------------------------------------