32-bit (NWAY) PCI Ethernet Adapter
		    NDIS/3 driver for PCI Ethernet adapter
================================================================================

The drivers contained in the directory \WINNT are for the following 32-BIT
Ethernet adapter:

	    10/100M (-NWAY) PCI Ethernet Adapter

They are used with Microsoft Windows NT Release 3.5, 3.51 or 4.0 on the X86
platform.  The driver named ETHPCI conforms to the Network Driver Interface
Specification (NDIS) 3.0.

File		  Description
---------------------------------------------------------------------------------

WNT35\ETHPCI.SY_  NDIS/3 driver for 32-bit PCI Ethernet adapter on NT 3.5

WNT40\ETHPCI.SY_  NDIS/3 driver for 32-bit PCI Ethernet adapter on NT 3.51 or 4.0

ETHPCI.HL_	  the help file for driver installation

README.TXT	  this documentation file



Installing driver on Microsoft Windows NT
-----------------------------------------

   1)  Choose the Control Panel icon.

   2)  In the Control Panel window, choose the Network icon.

   3)  In the Network Settings dialog box, choose the Add Adapter button.
       Then the Add Network Adapter dialog box appears.

   4)  In the list of network cards, select "<other> Requires disk from
       manufacturer", and then press <Enter>.

   5)  Insert this driver disk in the floppy diskette drive (A:\), type in
       the correct drive path (A:\winnt\...), and then click <OK>.

   6)  In the Select OEM Option dialog box, you will see the following
       products in the menu list. Select the 10/100M(-NWAY) PCI Ethernet Adapter
       and click <OK> button to install it.

	    10/100M(-NWAY) PCI Ethernet Adapter

   7)  When the 10/100M(-NWAY) PCI Ethernet Adapter Setup dialog box appears,
       specify the "Connection Type" of the adapter plugged in your PC.
       The SETUP program does not support adapter detection. Make sure these settings match
       your adapter's configurations.  Otherwise network function can not
       be activated.



       The connection types for 10/100M (NWAY) PCI Ethernet Adapter are:
       ------------------------------------------------------------------------------------
	AutoSense	    Performs automatic media detection during driver initialization

	Twisted Pair	    RJ-45 connector
	(10BASE-T)	    Line speed: 10 Megabits per second (Mbps)

	Twisted Pair	    RJ-45 connector
	(10BASE-T)	    Communication in full-duplex mode,
	Full_Duplex	    Line speed: 20Mbps

	Twisted Pair	    RJ-45 connector
	(100BASE-TX)	    Line speed: 100 Mbps

	Twisted Pair	    RJ-45 connector
	(100BASE-TX)	    Communication in full-duplex mode,
	Full_Duplex	    Line speed: 200Mbps


   8) After successful installation, the "Installed Adapter Cards" menu shows you,
      "10/100M(-NWAY) PCI Ethernet Adapter Fast Ethernet Adapter" and "32-bit PCI Series
      (Fast) Ethernet Adapter Driver" appears in the "Installed Network Software" menu.

   9) Now, the SETUP program has already copied the ETHPCI.SY_ and the OEMSETUP.INF from
      the Driver Diskette (A:\) to C:\<NT system directory>\SYSTEM32\DRIVERS and
      C:\<NT system directory>\SYSTEM32 respectively. If you need to re-install the driver,
      you do not need to install from the driver diskette.

  10) Click on the "Bindings" option under Network Setting dialog box to bind the adapter
      to the transport drivers.

  11) Restart your system.

-------------------------------------------------------------------------------------------
Trademarks:
Microsoft Windows NT is a trademark of Microsoft Corporation.

--- End of File ---