32-bit PCI Series (Fast) Ethernet ADAPTER Netware Driver Installation Overview (C) Copyright 1996 32-bit PCI Adapter Prod. All Rights Reserved. This README file is an explanation of the files contained in the \NETWARE\ODI\DOSODI subdirectory of this diskette and their usage. For more information please refer to "NOVELL NetWare ODI Shell for DOS" manual. List Of Files You Need ---------------------- ------------------------------------------------------ Filename Description ------------------------------------------------------ LSL.COM This file implements the Link Support Layer for DOS ODI workstations and is the program that is generally loaded first when booting. The Link Support Layer file enables the workstation to communicate over several protocols. IPXODI.COM This is Novell's protocol stack for DOS ODI workstations. It performs the same functions as the IPX.COM, which is used for DOS workstations. However it is optional and is loaded after the LAN driver. Other protocols can be loaded in its place or with it. This is one of the key features of the ODI environment. NETX.COM NetWare Network program. -------------------------------------- If you use You Need -------------------------------------- Conventional memory NETx.COM Expanded memory EMSNETx.EXE (LIM 4.0 EMS Compatible) Extended memory XMSNETx.EXE (XMS 2.0 compatible) --------------------------------------- NETBIOS.EXE The Netbios emulation program (INT 5CH interface) allows you to run Netbios application programs based on the NETBIOS.EXE interface. The running sequence is: a. IPX shell driver IPX.COM NETBIOS.EXE ---> netbios emulation ... interface b. DOS ODI driver LSL.COM PCIMLID.COM ---> 32-bit PCI Series (Fast) Ethernet Adapter DOS ODI driver IPXODI.COM NETBIOS.EXE ... RXMONSTK.COM RXMONSTK.COM is Receive Monitor Utility for Monitor Type Applications (Such as Lan Analyzer) If the monitor type applications you are using seems to stop receiving network packets when you install a new LAN driver on your workstation, load the RXMONSTK.COM file. Load the RXMONSTK.COM file after the LSL.COM driver but before the LAN driver. The RXMONSTK.COM operates as a TSR and requires 2684 bytes of memory. You can load only one LAN driver when using the RxMonStk. The running sequence is: LSL.COM RXMONSTK.COM PCIMLID.COM ---> 32-bit PCI Series (Fast) Ethernet Adapter DOS ODI driver IPXODI.COM ... ------------------------------------------------------------ --- End of File ---