ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³	       32-bit PCI (Fast) Ethernet Adapter		³
³	 NDIS/2 DRIVER FOR LANTASTIC DRIVER INSTALLATION	³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

  Content:
  --------

      A) Install NDIS 2 drivers for LANtastic 5.0

      B) Install NDIS 2 drivers for LANtastic 6.0


A) Install NDIS 2 drivers for LANtastic 5.0
   ========================================

   LANtastic 5.0 can support following driver: NDIS driver


   Using NDIS driver:
   ----------------------
   For NDIS driver, we support "ETHPCI.DOS" driver for
   32-bit PCI (Fast) Ethernet adapter.	User can use
   "ETHPCI.DOS" driver to replace AEXNDIS.DOS which is the
   NDIS driver offered by ARTISOFT.

   Example  -----  CONFIG.SYS

	DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
	DEVICE=C:\LANTASTI\ETHPCI.DOS	   -------> from Driver Diskette


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

	C:\LANTASTI\AI-NDIS BIND_TO=ETHPCI_NIF
	C:\LANTASTI\AILANBIO
	C:\LANTASTI\REDIR MachineName


   Example  -----  PROTOCOL.INI

	[PROTMAN]
	   DRIVERNAME = PROTMAN$
	   DYNAMIC = YES

	[ETHPCI_NIF]
	   DRIVERNAME = ETHPCI$

   Comments:
     If you are using PROTMAN.DOS V1.x, you must use the NO_BIND
     option on the AI-NDIS command line in the STARTNET.BAT,
     and you need to run NETBIND.EXE V1.x before AILANBIO.EXE.


B) Install NDIS 2 drivers for LANtastic 6.0
   ========================================

   LANtastic 6.0 can support following driver: NDIS driver


  Using NDIS driver:
  ----------------------

   To install NDIS driver "ETHPCI.DOS", user can use
   LANtastic 6.0  install program, and select "NDIS support for
   network adapters" then insert Driver Diskette , and type path
   "A:\NDIS\DOS".  Install program will search "ETHPCI.DOS" and
   "PROTOCOL.INI" and copy these two files to target directory.

   IF user already install LANtastic 6.0 and want to install
   32-bit PCI Ethernet Adapter, just replace AEXNDIS.DOS with
   the 32-bit PCI LAN adapter NDIS driver "ETHPCI.DOS" at
   CONFIG.SYS

   "ETHPCI.DOS"  is NDIS driver from driver diskette
   "AEXNDIS.DOS" is NDIS driver which supported by ARTISOFT


   Example  -----  CONFIG.SYS

	DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
	DEVICE=C:\LANTASTI\ETHPCI.DOS	     -------> from drivers diskette


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    @echo ===== Begin LANtastic configuration =====
    SET LAN_CFG=C:\LANTASTI
    PATH C:\LANTASTI;%PATH%
    SET LAN_DIR=C:\LANTASTI.NET

    rem Please obtain the NETBEUI.EXE program from Microsoft
    NETBEUI
    AI-NDIS BIND_TO=AEXNDIS_NIF
    AILANBIO @STARTNET.CFG
    REDIR THOMAS @STARTNET.CFG

    SERVER C:\LANTASTI.NET @STARTNET.CFG
    NET LOGIN \\THOMAS
    @echo ===== End LANtastic configuration =====


   Example  -----  Protocol.ini

    [PROTMAN]
    Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

    [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = ETHPCI_NIF
      LANABASE = 1

    [ETHPCI_NIF]
      DriverName = ETHPCI$

-----
All trademarks or brand names mentioned are properties
of their respective companies.

--- End of File ---