32-bit (NWAY) PCI (Fast) Ethernet Adapter NDIS/2 DRIVER INSTALLATION FOR LAN MANAGER =========================================================================== The ETHPCI drivers located in the MSLANMAN.DOS and MSLANMAN.OS2 Directories conform to the Network Driver Interface Specification (NDIS) 2.0 as defined by Microsoft/3Com. NDIS Driver Installation on LAN Manager v2.0 ============================================ 1. Type "Setup" in the LAN Manager directory and press . 2. Choose "Import Network Drivers..." in the "Action" field. Press to continue. 3. Insert your Driver Diskette into the floppy diskette drive(A: or B:). Then press and the list of Imported Network Drivers appears on the screen. 4. Press the Bar to select the appropriate Network Adapter (i.e. "32-bit PCI Series (Fast) Ethernet Adapter"), and then press to confirm your choice. 5. Follow screen instructions to continue installation, until the Network Driver appears on the screen. 6. Identify your Network Adapter if asked. For example, select "32-bit PCI Series (Fast) Ethernet Adapter" to confirm any 32-bit PCI Series (Fast) Ethernet Adapter. 7. Select the "Add driver" and the "Add protocol" options. Then press to confirm your choices. The Workstation's primary parameters should appear on your screen. 8. Respond to all prompts issued on the screen. Select to confirm a choice. 9. Save all selections. Choose "Save" from the "Action Menu" 10.When the driver is successfully installed, press to exit. NDIS Driver Installation on LAN Manager v2.1 ============================================ 1. Type "lmsetup" in the LAN Manager directory and press . The Microsoft LAN Manager Setup screen will appear. 2. Choose "Network Drivers..." in the "Configuration" field. Press to confirm your choice. 3. Choose "Add New Configuration" and press to display a list of Network Adapter Drivers. 4. Choose "Other Driver" and press . 5. Insert the Driver Diskette into the floppy diskette drive(A: or B:). Indicate the driver location of the diskette and press to proceed. 6. Select the appropriate Network Adapter Driver from the list. For example, select "32-bit PCI Series (Fast) Ethernet Adapter" Press to confirm your choice. 7. Select an appropriate protocol. Use the bar to highlight your choice. 8. Select to confirm your choice. A "Configuration Complete" message should appear on the screen. 9. Save the configuration by selecting . 10.When the installation is complete, press to exit. NDIS Driver Installation on LAN Manager v2.2 ============================================ 1. Type "setup" in the LAN Manager directory and press . The Microsoft LAN Manager Setup screen should appear. 2. Choose "Network Drivers" in the "Configuration" field. Press to confirm your choice. 3. Choose "Add New Configuration" and press to display a list of Network Adapter Drivers. 4. Choose "Other Driver" and press . 5. Insert the Driver Diskette into the floppy diskette drive(A: or B:). Indicate the driver location of the diskette and press . 6. Select the appropriate Network Adapter Driver from the list. For example, select "32-bit PCI Series (Fast) Ethernet Adapter" Press to confirm your choice. 7. Select an appropriate protocol. Use the to highlight your choice. If you have chosen the TCP/IP protocol, you will be prompted to key in the IP address, the subnet mask, and the default gateway (router). By default, the workstation number of NetBios session is set to 6. Please refer to Microsoft LAN Manager Installation Manual for more details, or check the online help. 8. Select to confirm your choice. A Configuration Complete message should appear on the screen. 9. Save the configuration by selecting . 10.When the installation is complete, press to exit. If you are installing the LAN Manager for the first time, you will be prompted to key in the default user name and domain of the workstation, as well as to answer the questions concerning Windows environment and memory management. Just follow the instructions on the screen to complete installation. Sample Configuration Files ========================== LAN Manager 2.0 CONFIG.SYS File LASTDRIVE=Z BUFFERS = 35 FILES = 35 SHELL=C:\DOS50\COMMAND.COM C:\DOS50 /p /E:1024 DEVICE=C:\HIMEM.SYS DEVICE=C:\DOS50\SETVER.EXE DOS=HIGH,UMB DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ETH_32\ETHPCI.DOS DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS PROTOCOL.INI File [PROTOCOL MANAGER] DRIVERNAME = PROTMAN$ [NETBEUI_XIF] Drivername = netbeui$ BINDINGS = "ETHPCI_NIF" [ETHPCI_NIF] ;----------------------------------------------------------------------- ; Sample Protocol.ini file for 32-bit PCI Series (Fast) Ethernet Adapter NDIS/2 driver ;----------------------------------------------------------------------- DriverName = ETHPCI$ ; Slot = 1 ;; {1-16} ; SIA_Mode = AUTODETECT ;;{SIA_Mode = TP, BNC, TP_FULL_DUPLEX, AUTODETECT} ; DATA_RATE = MB10 ;; {MB10, MB100} ;----------------------------------------------------------------------- ; End of this sample file AUTOEXEC.BAT File @echo off PROMPT $P$G PATH=c:\PE2;C:\DOS50;C:\NC; APPEND=C:\PE2;C:\DOS50; REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES SET PATH=C:\LANMAN.DOS\NETPROG;%PATH% C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND NET START WORKSTATION REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES LAN Manager 2.1 or LAN Manager 2.2 CONFIG.SYS File LASTDRIVE=Z BUFFERS = 35 FILES = 35 SHELL=C:\DOS62\COMMAND.COM C:\DOS62 /p /E:1024 DEVICE=C:\HIMEM.SYS REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS -->remark this line DEVICE=C:\DOS62\SETVER.EXE DOS=HIGH,UMB DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ETH_32\ETHPCI.DOS PROTOCOL.INI File [PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI [NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = "ETHPCI_NIF" LANABASE = 0 [ETHPCI_NIF] ;------------------------------------------------------------------------ ; Sample Protocol.ini file for 32-bit PCI Series (Fast) Ethernet Adapter NDIS/2 driver ;------------------------------------------------------------------------ DriverName = ETHPCI$ ; Slot = 1 ;; {1-16} ; SIA_Mode = AUTODETECT ;; {SIA_Mode = TP, BNC, TP_FULL_DUPLEX, AUTODETECT} ; DATA_RATE = MB10 ;; {MB10, MB100} ;------------------------------------------------------------------------ ; End of this sample file AUTOEXEC.BAT File @echo off PROMPT $P$G PATH=c:\PE2;C:\DOS62;C:\NC; APPEND=C:\PE2;C:\DOS62; @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES @REM=== LANMAN 2.1 === SET PATH=C:\LANMAN.DOS\NETPROG;%PATH% NET START WORKSTATION LOAD NETBEUI @REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES @REM === LANMAN 2.1 === ------------------------------------------------------------------------------------ All trademarks or brand names mentioned are properties of their respective companies. --- End of File ---