32-bit (NWAY) PCI Series (Fast) Ethernet Adapter NetWare Client32 Driver Installation ================================================================================= (C) Copyright 1997 All Rights Reserved. Contents: A.) File Description B.) Driver Installation for NetWare Server 3.1x, 4.x C.) Driver Installation for DOS32 D.) Driver Installation for Microsoft Windows 3.x E.) Driver Installation for Microsoft Windows 95 F.) Parameter Description for PCIC32.LAN A.) File Description -------------------- ------------------------------------------------------------------------------- Filename Description ------------------------------------------------------------------------------- README.TXT This file. Presents a summary of the contents for NetWare Client32 driver installation. PCIC32.LAN 32-BIT Client32 ODI driver for 32-bit PCI Series (Fast) Ethernet Adapter. This driver complies with NetWare ODI Server driver SPEC 3.3. PCIC32.LDI The driver (PCIC32.LAN) installation information file for NetWare Server 4.X, NeDOS32, Microsoft Windows 3.x. PCIC32.INF The driver (PCIC32.LAN) installation information file for Microsoft Windows 95. SETWIN95.BAT Batch file for installing the Client32 driver Installation Information file on Microsoft Windows 95 system. ETHERTSM.NLM NetWare Server 3.1X, 4.X LAN driver Topology Specific Module(TSM) for Ethernet. 3.1X\NBI31X.NLM NetWare Server 3.1X Bus Interface module. 3.1X\MSM31X.NLM NetWare Server 3.1X LAN driver Media Support Module(MSM). 4.X\NBI.NLM NetWare Server 4.X Bus Interface module. 4.X\MSM.NLM NetWare Server 4.X LAN driver Media Support Module(MSM). ------------------------------------------------------------------------------- B.) Driver Installation for NetWare Server 3.1x, 4.x ---------------------------------------------------- B.1) Driver Installation for NetWare Server 3.12 1.> Insert 32-bit PCI Series (Fast) Ethernet Driver Diskette into the floppy drive (A: or B:). 2.> Change directory to NetWare Server directory (for example: CD\SERVER.312) 3.> Copy the following files from Driver Diskette to the system's NetWare Server directory. \LANDRV32\3.1X\NBI31X.NLM \LANDRV32\3.1X\MSM31X.NLM \LANDRV32\ETHERTSM.NLM \LANDRV32\PCIC32.LAN 4.> Sample AUTOEXEC.NCF for NetWare Server 3.12 AUTOEXEC.NCF ============ LOAD C:NBI31X LOAD C:MSM31X LOAD C:ETHERTSM LOAD C:PCIC32 FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:PCIC32 FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:PCIC32 FRAME=ETHERNET_II NAME=E_II LOAD C:PCIC32 FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 B.2) Driver Installation for NetWare Server 4.X 1.> Change directory to NetWare Server directory (for example: CD\NWSERVER ) 2.> Load NetWare Server System by typing SERVER, then press . 3.> When the Server prompt appears, load the NetWare Server Installation Utility by typing, :LOAD INSTALL 4.> Select "Driver options" from "Installation Options" menu. Press . 5.> Select "Configure network drivers" from "Driver Options" menu. Press . 6.> Select "Select a driver" from "Additional Driver Actions" menu. Press . 7.> Press to install an unlisted driver, and press to specify the correct path. 8.> Insert 32-bit PCI Series (Fast) Ethernet Driver Diskette into the floppy drive and enter the drive path (A: or B:). 9.> Select "[Green River]32-bit PCI Series (Fast) Ethernet driver" from the "Select a driver" menu, and then press . 10.> You can select "Select/Modify driver parameters and protocols" from the "Board PCIC32_1 (Driver PCIC32) Actions" menu. Press to set up the driver parameters. (Refer to Item F.) If the settings are correct, select "Save parameters and load driver", and press . 11.> Follow screen instructions to complete the driver installation. 12.> Sample AUTOEXEC.NCF for NetWare Server 4.X AUTOEXEC.NCF (one board) ======================== LOAD C:NBI LOAD C:MSM LOAD C:ETHERTSM LOAD C:PCIC32 FRAME=ETHERNET_802.2 NAME=E_8022 LOAD C:PCIC32 FRAME=ETHERNET_802.3 NAME=E_8023 LOAD C:PCIC32 FRAME=ETHERNET_II NAME=E_II LOAD C:PCIC32 FRAME=ETHERNET_SNAP NAME=E_SNAP BIND IPX E_8022 NET=10 BIND IPX E_8023 NET=20 BIND IPX E_II NET=30 BIND IPX E_SNAP NET=40 AUTOEXEC.NCF (two boards) ========================= LOAD C:NBI LOAD C:MSM LOAD C:ETHERTSM LOAD C:PCIC32 SLOT=10001 FRAME=ETHERNET_802.2 NAME=E_8022_1 LOAD C:PCIC32 SLOT=10001 FRAME=ETHERNET_802.3 NAME=E_8023_1 LOAD C:PCIC32 SLOT=10001 FRAME=ETHERNET_II NAME=E_II_1 LOAD C:PCIC32 SLOT=10001 FRAME=ETHERNET_SNAP NAME=E_SNAP_1 LOAD C:PCIC32 SLOT=10002 FRAME=ETHERNET_802.2 NAME=E_8022_2 LOAD C:PCIC32 SLOT=10002 FRAME=ETHERNET_802.3 NAME=E_8023_2 LOAD C:PCIC32 SLOT=10002 FRAME=ETHERNET_II NAME=E_II_2 LOAD C:PCIC32 SLOT=10002 FRAME=ETHERNET_SNAP NAME=E_SNAP_2 BIND IPX E_8022_1 NET=10 BIND IPX E_8023_1 NET=20 BIND IPX E_II_1 NET=30 BIND IPX E_SNAP_1 NET=40 BIND IPX E_8022_2 NET=50 BIND IPX E_8023_2 NET=60 BIND IPX E_II_2 NET=70 BIND IPX E_SNAP_2 NET=80 C.) Driver Installation for DOS32 --------------------------------- 1.> After installing the NetWare Client 32 for DOS, all you have to do is modify STARTNET.BAT. Please see the sample STARTNET.BAT below the following installation instructions. 2.> Run INSTALL.EXE from NetWare DOS 32 diskette 1 (or from NetWare 4.11 CD). When the product manual appears, mark the "NetWare Client 32 for DOS" item, and press to continue the installation process. 3.> Select "OTHER DRIVERS" item from the "32-bit Network Board Drivers" menu, and press . 4.> Insert the 32-bit PCI Series (Fast) Ethernet Driver Diskette into your floppy diskette drive, and specify the correct driver path (A: or B:). 5.> Select "32-bit PCI Series (Fast) Ethernet driver", and press . 6.> Set the correct driver parameters to comply with your network environment, and press to continue. Refer to Item F. for driver parameter settings. 7.> Follow screen instructions to complete the Client32 for DOS software installation. 8.> Reboot your machine. Sample STARTNET.BAT for DOS32. ============================== SET NWLANGUAGE=ENGLISH C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\PCIC32.LAN FRAME=ETHERNET_802.2 LOAD C:\NOVELL\CLIENT32\PCIC32.LAN FRAME=ETHERNET_802.3 LOAD C:\NOVELL\CLIENT32\PCIC32.LAN FRAME=ETHERNET_II LOAD C:\NOVELL\CLIENT32\PCIC32.LAN FRAME=ETHERNET_SNAP LOAD C:\NOVELL\CLIENT32\IPX.NLM LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM D.) Driver Installation for Microsoft Windows 3.x ------------------------------------------------- Please refer to Item C. In Step 2, mark "NetWare Client 32 for DOS" and "Client 32 for Windows", and follow Step 3...8 to complete the installation. E.) Driver Installation for Microsoft Windows 95 ------------------------------------------------ The 32-bit PCI Series (Fast) Ethernet Adapters are based on the DEC chip DC21x40. Thus the 21x40 driver supported by Win95 will work for these adapters. However, if you want to run the 32-bit PCI Series (Fast) Ethernet driver, you should remove the adapter object and driver from Win95 system before installing it. No matter which driver you have installed, the DEC DC21x4 based driver or 32-bit PCI Series (Fast) Ethernet NDIS 2/3 driver, before installing the 32-bit PCI Series (Fast) Ethernet Adapter Client 32 driver, you should take the following steps. E.1) Remove adapter object & driver for DECchip 21140 or 32-bit PCI Series (Fast) Ethernet Adapter ** ================================================ 1.> Click the "My Computer" icon. 2.> Click the "Control Panel" icon in My Computer window. 3.> Double-click the "System" icon in the Control Panel window. 4.> Click the "Network adapter" icon in the System window. 5.> Click on: "PCI Fast Ethernet DECchip 21140 Based Adapter" or "32-bit 10/100M (-NWAY) PCI Fast Ethernet Adapter" in the System window. 6.> Click button, and press . 7.> Close the dialog windows. **Note: If you NEVER plugged any 32-bit PCI Series (Fast) Ethernet adapter into your PC, Procedure E.1 is not necessary. Just start from Procedure E.2. E.2) Install the Client 32 driver installation information file ========================================================== 8.> Switch to MS-DOS Command Prompt. 9.> Insert the 32-bit PCI Series (Fast) Ethernet Driver Diskette into the floppy drive (A: or B:). 10.> Type the following DOS commands: CD \WINDOWS\INF RENAME NETPCI.INF *.IN_ RENAME ETHPCI.INF *.IN_ COPY A:\LANDRV32\PCIC32.INF EXIT Notice: You also can use the SetWin95.bat file located in the \LANDRV32 directory. You can execute the following program to install the Client 32 driver installation information file. C:\>A:\LANDRV32\SETWIN95 C:\ 11.> Reboot your machine. E.3) Install Client 32 Driver in Windows 95 ====================================== 12.> Plug 32-bit PCI Series (Fast) Ethernet adapter into one of the Master PCI slots of your PCI platform. 13.> Power on your machine and boot from Windows 95. 14.> Windows 95 will prompt you with the PCI Ethernet Controller in New Hardware Found dialog box. 15.> Then the screen displays either "32-bit 10/100M (-NWAY) PCI Fast Ethernet Adapter" in New Hardware Found dialog box. 16.> Follow screen instructions to complete installation. Note: Windows 95 will ask you to key in the proper path. Use any of the following: a.> NetWare Client 32 for Windows 95 Disk b.> 32-bit PCI Series (Fast) Ethernet Driver Diskette --> Insert 32-bit PCI Series (Fast) Ethernet Driver Diskette, Then assign the path to A:\LANDRV32 or B:\LANDRV32 c.> Windows 95 CD-ROM F.) Parameters Description for PCIC32.LAN ----------------------------------------- The following parameters are used in PCIC32.LAN. 1.> SLOT: Specify which adapter is enabled when multiple 32-bit PCI Series (Fast) Ethernet Adapters are found in your computer. The SLOT keyword is an index value corresponding to PCI BIOS. The value of SLOT is different from one machine to the other. Ex: LOAD PCIC32 SLOT=10001 FRAME=ETHERNET_802.2 LOAD PCIC32 SLOT=10004 FRAME=ETHERNET_II 2.> FRAME : Specify which frame type is used by the driver. Accepted values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and Ethernet_SNAP. Multiple frame types can be enabled by the driver by loading the same driver with different FRAME types. Ex: LOAD PCIC32 FRAME=ETHERNET_802.2 LOAD PCIC32 FRAME=ETHERNET_802.3 LOAD PCIC32 FRAME=ETHERNET_II LOAD PCIC32 FRAME=ETHERNET_SNAP 3.> NODE : Use a different address to replace the node address burned in EEPROM. Ex: LOAD PCIC32 NODE=0200E8001122 4.> Attachment: Specify the connection type of 32-bit PCI Series (Fast) Ethernet adapter. Default value is AUTODETECT. Driver Parameters Description ================= ==================================================== AUTODETECT (Autodetect) for 10/100M (NWAY) PCI Adapter, run-time auto-sense the connection type and line speed. TP (Twisted Pair) Connector type is RJ-45. 10BASE-T ==> Line_Speed=10 100BASE-TX ==> Line_Speed=100 BNC (Thick wire) Connector is BNC (10BASE2). 10/100M (-NWAY) Adapter does not support this parameter. AUI (AUI) Connector is AUI (10BASE5). Currently, 32-bit PCI Series (Fast) Ethernet boards do not support this connector. TP_FULL_DUPLEX (Twisted Pair - Full Duplex) Connector is RJ-45 in full-duplex mode. The throughput is 20Mbps for 10BASET and 200Mbps for 100BASE-Tx. TP_NO_LINK_TEST (Twisted Pair with link test disabled) Connector is RJ-45, but the link test function of transceiver is disabled. This function should be enabled if your repeater does not support link test function. Ex: LOAD PCIC32 TP LOAD PCIC32 TP LINE_SPEED=100 LOAD PCIC32 BNC LOAD PCIC32 AUTODETECT LOAD PCIC32 TP_FULL_DUPLEX LINE_SPEED=100 5.> LINE_SPEED: (Line_Speed) Specify the speed that your network adapter. Acceptable values are 10 and 100. No default value is assigned. 6.> TURBO : (Turbo mode) Enhance the performance if your PCI platform uses SATURN CDC or PCMC chip. 7.> SNOOZE : (Snooze mode) With 10/100M (-NWAY) PCI Adapter's new NIC, Snooze mode can reduce power consumption. The NIC can stop most of its internal clock operation unless network activity is detected. This is not a default function of PCIC32.LAN. 8.> CAPTURE_EFFECT: (Enable this function to solve the Capture Effect problem.) The driver offers a vendor supported function to avoid starvation when multiple collisions occur on the network line. But this function is not a standard part of the Ethernet SPEC. This parameter lets you enable the function to prevent the Capture Effect problem. -- End of File --