Driver Installation - for LAN Manager Workstation/Server
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


   (1) Introduction:
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
     This document describes the procedure to setup LAN Manager 2.1
     Workstation/Server driver for NF560 Fast Ethernet adapter.


   (2) Location of Driver:
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
                (DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\DC21X4\DC21X4.DOS
                (OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\DC21X4\DC21X4.OS2


   (3) Sample Configuration Files:
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
      %%% CONFIG.SYS (for DOS will contain) %%%
          DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\DC21X4\DC21X4.DOS


      %%% CONFIG.SYS (for OS/2 will contain) %%%
          DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
          DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\DC21X4\DC21X4.OS2


      %%% PROTOCOL.INI (will contain) %%%
         [DC21X4_NIF]
         ; NF560 RPOTOCOL.INI SAMPLE

           DriverName = DC21X4$

           ;; Range: 1-26.
           ;; Usage: "Slot=nn"
           ;------------------
           ; Slot = 16

           ;; Options: TP, TP_FULL_DUPLEX,
           ;;          TP_LINK_DISABLE, AUTOSENSE.
           ;; Usage: "SIA_Mode=xxx"
           ;-----------------------
           SIA_Mode = AUTOSENSE

           ;; Options: MB10, MB100.
           ;; Usage: "DATA_RATE=xxx"
           ;-------------------------
           ; DATA_RATE = MB100


   (4) Setup Procedures:
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
      Before you start with the installation process, make sure that the
      adapter is properly installed and configured. Make sure your
      Microsoft LAN Manager is properly installed.

      1. Run the appropriate Microsoft LAN Manager SETUP for computer you
         are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
         item ,(the NF560 driver isn't included on the LAN Manager disk)
         and insert the NF560 driver diskette, select the NF560 driver and
         follow the directions.

      2. When completed, reboot your computer .