ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
	    º							º
            º     Compex RL2000A PnP Series Ethernet Adapter    º
            º  Copyright (C) 1996 by PDS. All Rights Reserved.  º
	    º							º
	    ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INTRODUCTION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

 The RLASET utility Version 2.10 provides the following options:

Configuring the RL2000A PNP Ethernet Adapter
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

1) Insert the distribution disk in drive A and run RLASET.
   e.g.  A:> Utility\RLASET.EXE

2) RLASET automatically detects and verify for any conflict. Then display
   the main menu.
                        Configuration
                        Diagnostic

3) To test card select Diagnostic option. Goto Diagnostic in step (6).
   To reconfigure the card select Configuration option and contiune.

4) The Configuration menu displays the current card configuration and the
   Modify Configuration option.
   To modify, select Modify Configuration lets you change the following:-
                IO Base address
                Interrupt (IRQ) number
                Enable/Disable BOOTROM
                PnP | Non-PnP | Auto-Detect operating mode

   If you install Windows 95 or other Plug and Play software, just select
   PnP operating mode and save. There is no need to change any other option.
   You may also need to configure card to non-PnP mode if the PnP BIOS is not
   operating correctly. Furthermore, the marking with an asterisk ("*") of
   possible conflicting IO addresses and IRQ numbers helps you to select a
   conflict free setting.

5) Just save and reboot the PC the selected options will take effect.


Diagnostic
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
6) The diagnostic menu lets you do the following:-
                On board card test
                Transmit/Receive test

7) On board card test let you verify the functionality of the card in the PC.

8) Transmit/Receive test let you test the card communication functionally.
   This test requires at least 2 PC connected to the same network cable
   segment.