ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Compex RL2000A PnP Series Ethernet Adapter º º Copyright (C) 1996 by PDS. All Rights Reserved. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ GENERAL INFORMATION ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1) RLPNPA.COM This ODI driver for Windows For Workgroups 3.11 2) OEMSETUP.INF This is a Windows For Workgroups 3.11 installation file for RL2000A PnP Ethernet adapters. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ INSTALLATION GUIDE ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ** - IMPORTANT ========= ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Recommended you run RLASET configuration utility first before you proceed with installation of LAN adapter driver described below. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Windows For Workgroups 3.11 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ a) Install NetWare Client for DOS support to local drive C If you don't have NetWare Client for DOS installation disk, Make a directory NWCLIENT at the root of your local drive C. Then copy from RL2000A driver distribution, A:\DOSODI\*.* C:\NWCLIENT b) Edit AUTOEXEC.BAT and add the following lines; Path = C:\NWCLIENT;%PATH% C:\NWCLIENT\LSL C:\NWCLIENT\RLPNPA C:\NWCLIENT\IPXODI c) Start Windows For Workgroups 3.11. d) In the Network folder, choose the Network Setup icon. e) In the Network Setup dialog box, choose the DRIVERS button. f) The Network Drivers box appears. Choose the ADD ADAPTER button. g) The Add Network Adapter box appears. From the list of network adapters, select Unlisted or Updated Network Adapter. h) The Install Driver box appears. Insert driver diskette into floppy drive and type the path of the driver. eg. A:\WFW311 i) In the Network Drivers dialog box, 'Compex RL2000A PnP Ethernet Adapter' appears highlighted. Choose the CLOSE button. j) Back to the Network Setup box, Choose the OK button to save. k) Windows will continue and copy the necessary files to the local drive C:\Windows directory. l) When completed, you will be prompted to Restart Computer. Remove the distribution disk from drive A and press Enter to restart computer.