This is Rl2000A-PNP SCO 5 LLI driver v1.00b for SCO UNIX OPEN Server 5.

This driver supports the following adapter(s):

        Compex RL2000A-PNP 

Prepare driver disk for installation
=====================================
1) Boot MSDOS, run RLA100B.EXE to extract it.

2) From SCO UNIX Open 5 machine, copy file RLA100B.DD to the hard disk.
   e.g.,
          doscp /dev/fd0:rla100b.dd .

3) Verify the checksum. It should be 43316
   e.g.,
	     sum rla100b.dd

4) Format a new 1.44MB disk
   e.g.,
	    format		

5) Run dd to extract image file to diskstte.
   e.g.,
         dd if=rla100b.dd of=/dev/fd0

6) Label disk as, COMPEX RL2000A-PNP SCO UNIX LLI driver
                  version 1.00b

To install the driver, run custom and netconfig
Refer to SCO UNIX 5 for more detailed installation procedures.


            ***********************************************************

***  NOTE:- To disable the driver after installation, you must first 
	    run netconfig to remove the driver configuration.  
            Then run custom to remove the driver from the hard disk and
	    relink.

	    ************************************************************