ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
            º                                                  º
            º        Compex RL2000 PCI Ethernet Adapter        º
            º  Copyright (C) 1996 by PDS. All Rights Reserved. º
            º                                                  º
            ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE  ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 Windows For Workgroups 3.11
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
     a) Start Windows For Workgroups 3.11.

     b) In the Network folder, choose the Network Setup icon.

     c) In the Network Setup dialog box, choose the DRIVERS button.

     d) The Network Drivers box appears. Choose the ADD ADAPTER
        button.

     e) The Add Network Adapter box appears. From the list of network
        adapters, select Unlisted or Updated Network Adapter.

     f) The Install Driver box appears. Insert driver diskette
        into floppy drive and type the path of the NDIS driver. Choose
        the OK button

          eg.     A:\WFW311
	
     g) The Unlisted or Updated Network Adapter box appears. Inside
        this box, 'Compex RL2000 PCI Ethernet Adapter' appears
        highlighted. Choose the OK button.

     h) In the Network Drivers dialog box, 'Compex RL2000 PCI Ethernet
        Adapter' appears highlighted. Choose the CLOSE button.

        Note: In the case of multiple adapters, you MUST choose the SETUP
              button and then select the ADVANCED button to specify the
              Selected ID.
              Please refer to 'DRIVER CONFIGURATION PARAMETER' section.

     i) The Network Setup dialog box appears. Under the Network
        Driver list, 'Compex RL2000 PCI Ethernet Adapter'
        appears highlighted. Choose the OK button.

     j) The Windows setup dialog box appears. Because you are replacing
        the Enhanced Mode Protocol Manager, choose the YES button.

        
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ DRIVER CONFIGURATION PARAMETER ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 In Compex RL2000 PCI Ethernet Adapter Setup, users are required to
 select correct configuration parameter for their multiple network adapters
 installed in the system.

 Selected ID - It specifies which adapter the driver is going to control.