ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
            º                                                  º
            º        Compex RL2000 PCI Ethernet Adapter        º
            º  Copyright (C) 1996 by PDS. All Rights Reserved. º
            º                                                  º
            ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 Below are guidelines for installing the server driver, RL2000.LAN,
 in a NetWare v3.12 environment.

     1. Install Novell NetWare v3.12 operating system into your
        server station hard disk.

     2. Copy all files in A:\NW3.12 directory of distribution diskette 
        to C:\SERVER.312 directory of NetWare v3.12 server hard disk.
        For example, type,

                    A:\ COPY A:\NW3.12\*.* C:\SERVER.312

     3. Run SERVER.EXE on the NetWare v3.12 server station.

     4. At the NetWare 386 prompt, type:

             : C:\SERVER.312\RL312.NCF <enter>

        This loads the following files,  NBI31X.NLM,
        MSM31X, ETHERTSM, and RL2000

     5. Next bind IPX to the server driver by typing:

             : BIND IPX RL2000 net=xxxxxxxx

        where xxxxxxxx can be 1 to 8 digits long in hexadecimal.

     6. Server is now ready to service the workstations


 Update AUTOEXEC.NCF file to auto-load these file when the server starts.
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
 Login in as Supervisor user and change to the SYSTEM directory.
 Use any text editor like Notepad or DOS EDIT open the file AUTOEXEC.NCF
 Insert the following text after the line "IPX internet address= nnnnnnnn"
 e.g.
                 IPX internet address = nnnnnnnn
                 C:\SERVER.312\RL312.NCF           <-- add line
                 Bind IPX RL2000 net=xxxxxxxx      <-- add line


 If you load manually, the modules should be loaded in this sequence;

                : Load NBI31X.NLM
                : Load MSM31X.NLM
                : Load ETHERTSM.NLM
                : Load RL2000.LAN
		: Bind IPX RL2000 net=xxxxxxxx     

** NOTE **

 Upon loading three NLM modules (MSM.NLM, ETHERTSM.NLM and NBI.NLM),
 if your NetWare server has not run the Loader patch from Novell for
 NetWare server this error message will show,

 " This version of NetWare does not support protected mode BIOS access.
   Without a loader patch some PCI driver may fail"

 With RL2000 driver, just ignore the message.
 RL2000 driver will run properly without the loader patch on the server.

 To support protected mode BIOS access, run the Novell Loader patch.
 You can get the patch software from any NetWare distributors and dealers.
 Or connect to Novell WEB server to get a copy.
 The patch can also be found in Compex BBS, FTP, and WEB server.
 Download filename: NW312LDR.EXE
 From WEB or FTP, goto \pub\support\netware\nw3xx 

  Service      Description
 ---------------------------------------------------------------------
  BBS:         Our bulletin board contains the latest versions of the
               drivers that you can download.
               (65) 282-8854  (24-hour access)

  FTP site:    ftp.compex.com.sg

  WEB server:  www.compex.com.sg