ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
       º                                                              º
       º    Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter   º
       º        (C) Copyright PDS, 1998. All Rights Reserved.         º
       º                                                              º
       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INTRODUCTION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
The installation for the NDIS driver in Windows for Workgroups is menu
driven through the Windows interface.  The driver and other relevant
files are located in the WFW311 directory. The directory structure provided
on the driver diskette has been setup for automatic OEM installation. Follow
the guidelines in the Microsoft Windows for Workgroups  User's Guide for
more details to install the driver from the driver diskette.


ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 NDIS 3.0 Driver Installation for Windows for Workgroups v3.11
 =============================================================

 1.  In the Windows directory, run WIN.COM.

 2.  Insert the driver diskette into the system's floppy drive.

 3.  In the Windows for Workgroup 3.11 Program Manager, select
     <Network Setup> icon from the <Network> windows.

 4.  In the <Network Setup> dialog box, select the <Drivers...> button.

 5.  In the <Network Drivers> dialog box, select <Add Adapter> button.

 6.  In the <Add Network Adapter> dialog box, choose "Unlisted or Updated
     Network Adapter" from the menu and then select <OK>.

 7.  The <Install Driver> dialog box appears. Enter correct path of the
     driver (eg. A:\WFW311) and select <OK>.

 8.  The name of the adapter "Compex RL100ATX PCI Fast Ethernet Adapter"
     is displayed, select the adapter that matches the hardware from
     the Adapter list.
        [ Compex RL100ATX PCI Fast Ethernet Adapter ]

 9.  The screen shows the default configuration. The driver may be set to a
     different configuration. Choose "OK" if all configuration settings are 
     correct.

 10. The NDIS driver will be copied into the Windows for Workgroup. All other
     necessary files are also copied from the Windows for Workgroup disk.

 11. The NDIS driver installation is completed. Choose <Restart Computer>
     to make the changes effective.

 12. The Windows for Workgroups is now ready to run with the adapter.


 Driver Parameters
 =================

 There are 6 parameters that can be changed.

       a. BurstLen     = 32 longwords
          Burst Length defines the maximum number of long words that can be
          transferred within one PCI burst transaction.
          The reasonable values are "1 longword", "2 longwords", "4 longwords",
          "8 longwords", "16 longwords" and "32 longwords".
       b. CacheAlign   = 32 longword alignment
          Cache Alignment defines the address boundary for data burst.
          The reasonable values are "8 longword alignment",
          "16 longword alignment" and "32 longword alignment".
       c. Threshold    = full packet
          This value decides the transmit threshold level of the transmit FIFO.
          Transmission will start immediately after the transmit FIFL has
          reached the threshold level or full pkt has been transferred to the
          transmit FIFO if the frame length is less than the transmit threshold
          level.
                        TxThreshold         Transmit Threshold Level
                           00H                     full pkt
                           01H                     16 bytes
                           02H                     32 bytes
                           --                      --
                           7FH                      2032 bytes"
       d. LineSpeed    = AutoDetect
          This adapter can be operationed in 10M or 100M Mbps.
          The reasonable values are AutoDetect(auto detect line speed by the
          driver), 10M(set the line speed is 10M) and 100M(set the line speed
          is 100M).
       e. FullDuplex   = AutoDetect
          This adapter can be in half or full duplex mode. In half duplex mode,
          the RL100ATX can only either transmit or receive. In full duplex mode,
          the RL100ATX can transmit and receive at the same time.
          The reasonable values are AutoDetect(auto detect full duplex function
          by the driver), Disable(disable full duplex), and Enable(enable full
          duplex).
       f. SelectedID
          This parameter is necessary when your system is equipped with
          multiple RL100ATX cards.  For each driver, you must assign a unique
          physical address. The value of this parameter is a hexadecimal string
          of 12 digits.