ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter º º (C) Copyright PDS, 1998. All Rights Reserved. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ GENERAL INFORMATION ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCO UNIX OpenSever v5.0 installation Adapters supported: o -- Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1) Login as root user. (maintenance mode) 2) Execute "custom" A menu selection screen will be popped up. Using [->] key to move cursor to "Software" menu item then press [] key to get into pull down menu then move to "Install New..." then press [ENTER] key ÉÍÍÍÍÍÍÍÍÍÍ Begin Installation on scoopen ÍÍÍÍÍÍÍÍÍÍ» º º º What host (machine) do you want to install from? º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º ³<*> From scoopen ³ º º ³< > From another host ³ º º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Select From scoopen and use [TAB] key to move cursor to [ Continue ] then press [ENTER] key and press [] key to get into pull down menu ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Select Media ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Insert media, and select media device. º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º Media Device:³|Floppy Disk Driver 0_____________________|v³ º º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º º º³*Floppy Disk Driver 0 ³º º º º³ Media Images ³º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ -> Select "Floppy Disk Driver 0" and use [TAB] key to move cursor to [ Continue ] then press [ENTER] key then press [ENTER] key again ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Install Reference on scosysv ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Installing: Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter º º º º Do you want a FULL or PARTIAL installation? º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Full ] [ Partial ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Using [TAB] key to move cursor to [ Full ] then press [ENTER] key After the installation progress the following message is displayed ÉÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍ» º Installation complete º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ OK ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [Enter] key and the selected adapter, Compex RL100ATX 10/100Base-TX PCI Fast Ethernet is added to the package list Using [<-] key to move cursor back to "Host" menu item then press [] key to get into pull down menu then move to "Exit" then press [ENTER] key Now that the driver is installed in the system successfully. 4) Execute "netconfig" to configure the driver A menu selection screen will be popped up. At "Hardware" menu item press [] key to get into pull down menu then move to "Add new LAN adapter" then press [ENTER] key ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºThe following adapters have been found: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³* Compex RL100ATX 10/100Base-TX PCI Fast Ethernet adapter -PCI Bus#0, PCI#³º º³ ³º º³ ³º º³ ³º º³ ³º ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº º[ Configure hardware not listed above... ] º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Use the Tab key to move to [Contiune] and then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add Protocol ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºSelect one networking product to be added to º ºCompex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³ HW Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter ³º º³ - SCO IPX/SPX ³º º³ * - SCO TCP/IP ³º º³ ³º º³ ³º ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Add ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ SCO TCP/IP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º º º º º º º Local Host Name: |scoopen_____________| [ Advanced ]º º IP Address: |203.120.12.10_______| Options... º º Netmask: |255.255.255.0_______| º ºBroadcast Address: |203.120.12.255______| º º Domain Name: |scoopen.com_________| º º TCP connections: |256_________________| º º Pseudo ttys: |32__________________| º º º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º º º [ OK ] [ Cancel ] [ Help ]º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ * Note:- the values above are just examples. Contact your administrator for the proper information for your network. Input the required information then use [TAB] key to move cursor to "OK" then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º The following products were successfully configured into the system º º SCO TCP/IP º º Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter - PCI Bus#0,PCI Devicº º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ OK ] [ Help ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER] key At "Hardware" menu item press [] key to get into pull down menu then move to "Exit" then press [ENTER] key ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º The Unix Kernel must be re-linked before the changesº º??? made here will have an effect. º º Do you want to re-link the kernel now? º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ YES ] [ NO ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER] key Do you want this kernel to boot by default (y/n) y Do you want the kernel environment rebuilt (y/n) y 5) Reboot unix # shutdown -y -g0 6) On rebooting, Compex RL100ATX 10/100Base-TX PCI Fast Ethernet adapter will be initialized. Press Control-D to startup the server. Compex RL100ATX 10/100Base-TX PCI Fast Ethernet adapter is now ready to service the network.