ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
       º                                                              º
       º          Compex RL100ATX/10Base PCI Ethernet Adapter         º
       º        (C) Copyright PDS, 1998. All Rights Reserved.         º
       º                                                              º
       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

			  SUN PC-NFS V5.0 Installation

  Contents
  ÄÄÄÄÄÄÄÄ
	Introduction
	Getting Started
	Support Options        
	Copyrights, Trademarks, and Disclaimers

  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

        ** Note:- The NDIS2 driver is in A:\NDIS2\RL100A.DOS


	Please read all methods below and choose the one that matches your
	configuration.

	Method 1 -- NDIS Driver
	ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	When using PC-NFS concurrently with LAN Manager, select the "NDIS"
	option from the PC-NFS installation screen.  This option works with
	the NDIS driver included in the provided driver diskette.  Copy the
	files listed below into the \NFS directory of your hard disk.  These
	files will be used in the installation.

	File              Description
	------------     ----------------------------------------------
	NFS-NDIS.SYS      PC-NFS driver program
        RL100A.DOS        NDIS driver program
	PROTMAN.SYS       MS PROTOCOL MANAGER
	NETBIND.EXE       MS LAN MANAGER Netbind

	The following lists the contents of the configuration files:

	CONFIG.SYS                                AUTOEXEC.BAT
	ÄÄÄÄÄÄÄÄÄÄ                                ÄÄÄÄÄÄÄÄÄÄÄÄ
	SWITCHES=/F                               SET TZ=EST5EDT
	DEVICE=C:\HIMEM.SYS                       C:\DOS\SMARTDRV.EXE
	DEVICE=C:\EMM386.EXE NOEMS RAM            @PROMPT $p$g
	DOS=HIGH,UMB                              PATH=C:\NFS;C:\WINDOWS;
	BUFFERS=10,0                              C:\LANMAN\NETBIND
	FILES=40                                  SET TEMP=C:\DOS
	STACKS=0,0                                SET NFSDRIVE=C
	LASTDRIVE=G                               SET NFSPATH=C:\NFS
	SHELL=C:\DOS\COMMAND.COM C:\DOS /P        SET TN_DIR=C:\NFS\TELNET
	DEVICE=C:\NFS\PCNFS.SYS /l40              C:\NFS\PRT *
	DEVICE=C:\NFS\SOCKDRV.SYS                 C:\NFS\NET INIT
	DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN
	DEVICE=C:\LANMAN\NFS-NDIS.SYS
        DEVICE=C:\LANMAN\RL100A.DOS

	PROTOCOL.INI
	ÄÄÄÄÄÄÄÄÄÄÄÄ
	[PROTOCOL MANAGER]

              DriverName   = PROTMAN$

        [RL100A_NIF]
              DriverName = RL100A$


	[NFS-NDIS]
	      DriverName   = NFSLINK$
              Bindings     = RL100A_NIF

	To use the NDIS driver, the user needs to obtain a PC-NFS 5.0
        QUIKNDIS diskette which will install all but the Compex RL100ATX
        PCI NDIS driver.


        Method 2 -- ODI Driver
	ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	When using PC-NFS concurrently with NetWare 3.1x/4.0, select the
	"ODI" option from the PC-NFS installation screen.  This option works
	with the ODI driver included in the provided driver diskette.  Copy
	the files listed below into the \NFS directory of your hard disk.
	These files will be used in the installation.

	File             Description
	------------     -----------------------------------------
	NFSODI.SYS       PC-NFS driver program
        RL100A.COM      ODI driver program
	LSL.COM          NetWare Link Support Layer
	IPXODI.COM       NetWare IPX/SPX Protocol
	NETX.EXE         NetWare Workstation Shell

	The following lists the contents of the configuration files:

	CONFIG.SYS                             AUTOEXEC.BAT
	ÄÄÄÄÄÄÄÄÄÄ                             ÄÄÄÄÄÄÄÄÄÄÄÄ
	SWITCHES=/F                            SET TZ=EST5EDT
	DEVICE=C:\HIMEM.SYS                    C:\DOS\SMARTDRV.EXE
	DEVICE=C:\EMM386.EXE NOEMS RAM         @PROMPT $p$g
	DOS=HIGH,UMB                           PATH=C:\NFS;C:\WINDOWS;C:\DOS;
	BUFFERS=10,0                           SET TEMP=C:\DOS
	FILES=40                               SET NFSDRIVE=C
	STACKS=0,0                             SET NFSPATH=C:\NFS
	LASTDRIVE=G                            SET TN_DIR=C:\NFS\TELNET
	SHELL=C:\DOS\COMMAND.COM C:\DOS /P     LSL
	DEVICE=C:\NFS\PCNFS.SYS /l40           RL100A
	DEVICE=C:\NFS\SOCKDRV.SYS              C:\NFS\PRT *
	DEVICE=C:\NFS\NFSODI.SYS /b2           C:\NFS\NET INIT
					       IPXODI
					       NETX

	NET.CFG
	ÄÄÄÄÄÄÄ
        Link driver RL100A
	       Frame Ethernet_802.3
	       Frame Ethernet_II
	       Protocol IPX 0 Ethernet_802.3

	If your Novell FILE SERVER is configured to use the Ethernet_802.3
	frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS
	in your CONFIG.SYS file and add an entry in your NET.CFG file
	defining the two frames types.

  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	We are consistently improving and upgrading our drivers. you are
	welcomed at any time to browse through our BBS, and download any
	drivers, utilities and help files.

        If you still cannot get the Compex RL100ATX PCI adapter working properly,
        our technical experts are always ready to help.
        Please gather the following information :

        * The LAN adapter model
        * Driver disk date code (Printer on the driver disk label)
        * The extact text of any error message displayed on your screen
	* The type of computer
	* The type of network

  Copyrights, Trademarks, and Disclaimers
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
  rights reserved by Microsoft Corporation
 
  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
  reserved by Novell Corporation

  Further rights reserved to their respective corporations