ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
       º                                                              º
       º    Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter   º
       º        (C) Copyright PDS, 1998. All Rights Reserved.         º
       º                                                              º
       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE  ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
    To install the OS/2 ODI driver, the NetWare OS/2 Requester files
    should have been already installed. Please refer to the NetWare
    Requester for OS/2 installation documentation for more detailed
    information.

    Below is the procedures to properly install OS/2 ODI driver:

    1. In the Novell folder, choose the Install icon.

    2. The NetWare Workstation for OS/2 Installation Utility dialog box
       appears. From the Installation pull-down menu, choose "Requester on
       workstation" option.

    3. The Set Target Directory box appears. Click the OK button to continue.

    4. From the Requester Installation dialog box, choose "Edit CONFIG.SYS and
       Copy All Files..." option and click the OK button.

    5. Follow Novell Installation's instrustions to complete the installation.

Driver Options
==============

    1. If there is more than one RL100ATX card in your system, you must add the
       following statements to the NET.CFG file:

        Link Driver R100AOS2
                port    d000            -> selected RL100ATX card

    2. If you want to create or modify the NET.CFG file, you can choose 'This
       Workstation' from the 'Configuration' menu, you can use NET.CFG to set

       'Full Duplex Function' and 'Line Speed'.
       for example:

        Link Driver R100AOS2

        # The parameter 'linespeed' is used to set the line speed.
        # The default value of line speed is AutoDetect.
        # This adapter can be operationed in 10M or 100M Mbps. The reasonable
        # values are AutoDetect(auto detect line speed by the driver), 10M or
        # 100M
                linespeed 10m

        # The parameter 'fullduplex' is used to set the full duplex function.
        # The default value of full duplex function is AutoDetect.
        # This adapter can be in half or full duplex mode. In half duplex mode,
        # the RL100ATX can only either transmit or receive. In full duplex mode,
        # the RL100ATX can transmit and receive at the same time. The
        # reasonable values are AutoDetect(auto detect full duplex function
        # by the driver), Diable(disable full duplex function) and
        # Enable(enable full duplex function).
                fullduplex autodetect