ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
       º                                                              º
       º   Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter    º
       º        (C) Copyright PDS, 1998. All Rights Reserved.         º
       º                                                              º
       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INTRODUCTION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
The installation for the NDIS driver for Windows NT is menu driven
through the Windows NT interface. The driver and other relevant files are
located in the NT351 directory. The directory structure provided on the
driver diskette has been setup for automatic OEM installation. Follow the
guidelines in the Microsoft Windows NT manuals for more details to
install the driver from the driver diskette.


ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 NDIS 3.0 Driver Installation for Windows NT v3.51
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

 1.  If Windows NT operating system is being installed, select other
     manufacturers from the network adapter card option and follow
     steps 5-10.

 2.  If Windows NT operating system is already installed, logon as
     Administrator and select <Network> icon from the <Control Panel>.

 3.  Select <Add Adapter> from the <Network> window.

 4.  Select the option <<Other>Requires disk from manufacturer> from
     the <Network Adapter Card> box. A <Insert Diskette> dialog box
     appears.

 5.  Insert the driver diskette in Floppy Drive A.

 6.  Follow the instructions appearing on the screen and enter A:\NT351
      
 7.  A <Select OEM Option> dialog box appears. Select <OK> for RL100ATX
     adapter from the Adapter list.
        [ Compex RL100ATX 10/100Base-TX PCI Fast Ethernet Adapter ]

 8.  Select <OK> in the Network window.

 9)  You are back to the Network Setting dialog box.
     Click on the the other tabs and buttons and make changes if necessary to
     customise your configurations like adding additional protocols, change or
     assign a name to the PC, etc.. refer to Windows NT 3.51 manual for details.

     Click OK when completed.

 9.  Windows NT will copy and bind the selected items.

 10. When completed, Windows NT will reboot.

 11. The NDIS 3.0 driver for Windows NT is now properly installed