ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Compex FreedomLine 100TX PCI Ethernet Adapter º º Copyright (C) 1997 by PDS. All Rights Reserved. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ GENERAL INFORMATION ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCO UNIX OpenSever v5.0 MDI driver installation Adapters supported: o -- Compex FreedomLine 32 PCI Ethernet Adapter (21040, 21041) o -- Compex FreedomLine 100TX/10Base Fast Ethernet Adapter (21143) Rev. G1, G2, F8 Preparing the disk. ------------------- 1) Run the M5F101B2.EXE to extract the files in drive A:\ 2) The following file and directory path will be created; A:\SCO\custom.dst 3) Label the diskette, Compex FreedomLine 10/100TX MDI driver for SCO UNIX OpenServer 5 Version: 1.01b2 Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1) Login as root user. (On maintenance mode) 2) Execute "custom" A menu selection screen will be popped up. Using [->] key to move cursor to "Software" menu item then press [] key to get into pull down menu then move to "Install New..." then press [ENTER] key ÉÍÍÍÍÍÍÍÍÍÍ Begin Installation on scoopen ÍÍÍÍÍÍÍÍÍÍ» º º º What host (machine) do you want to install from? º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º ³<*> From scoopen ³ º º ³< > From another host ³ º º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Select From scoopen and use [TAB] key to move cursor to [ Continue ] then press [ENTER] key and press [] key to get into pull down menu ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Select Media ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Insert media, and select media device. º º º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º º Media Device:³|Floppy Disk Driver 0_____________________|v³ º º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º º º³*Floppy Disk Driver 0 ³º º º º³ Media Images ³º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ -> Insert the driver disk prepared above in drive A Select "Floppy Disk Driver 0" and use [TAB] key to move cursor to [ Continue ] then press [ENTER] key then press [ENTER] key again ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Install Reference on scosysv ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Installing: Compex FreedomLine 100TX PCI Ethernet Adapter º º º º Do you want a FULL or PARTIAL installation? º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Full ] [ Partial ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Using [TAB] key to move cursor to [ Full ] then press [ENTER] key After the installation progress the following message is displayed ÉÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍ» º Installation complete º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ OK ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [Enter] key and the selected adapter, Compex FL100TX PCI Ethernet Adapter is added to the package list Using [<-] key to move cursor back to "Host" menu item then press [] key to get into pull down menu then move to "Exit" then press [ENTER] key Now that the driver is installed in the system successfully. 4) Execute "netconfig" to configure the driver A menu selection screen will be popped up. At "Hardware" menu item press [] key to get into pull down menu then move to "Add new LAN adapter" then press [ENTER] key ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºThe following adapters have been found: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³* Compex FreedomLine 100TX PCI Ethernet adapter ³º º³ ³º ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº º[ Configure hardware not listed above... ] º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Continue ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Use the Tab key to move to [Contiune] and then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add Protocol ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ºSelect one networking product to be added to º ºCompex FreedomLine 100TX PCI Ethernet Adapter: º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º³ HW Compex FreedomLine 100TX PCI Ethernet Adapter ³º º³ - SCO IPX/SPX ³º º³ * - SCO TCP/IP ³º º³ ³º ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ Add ] [ Cancel ] [ Help ]º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ SCO TCP/IP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Local Host Name: |scoopen_____________| [ Advanced ]º º IP Address: |192.168.168.10______| Options... º º Netmask: |255.255.255.0_______| º ºBroadcast Address: |192.168.168.255_____| º º Domain Name: |scoopen.com_________| º º TCP connections: |256_________________| º º Pseudo ttys: |32__________________| º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º º º [ OK ] [ Cancel ] [ Help ]º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ * Note:- the values above are just examples. Contact your administrator for the proper information for your network. Input the required information then use [TAB] key to move cursor to "OK" then press [ENTER] key. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º The following products were successfully configured into the system º º SCO TCP/IP º º Compex FreedomLine 100TX PCI Ethernet Adapter - PCI Bus#0,PCI Device#19, º º º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º[ OK ] [ Help ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER] key * Note: PCI Bus#, PCI Device# detected may vary in different machine. At "Hardware" menu item press [] key to get into pull down menu then move to "Exit" then press [ENTER] key ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º The Unix Kernel must be re-linked before the changesº º??? made here will have an effect. º º Do you want to re-link the kernel now? º ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º [ YES ] [ NO ] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [ENTER] key Do you want this kernel to boot by default (y/n) y Do you want the kernel environment rebuilt (y/n) y 5) Reboot unix # shutdown -y -g0 6) On rebooting, Compex FreedomLine 100TX PCI Ethernet adapter will be initialized. Press Control-D to startup the server. Compex FreedomLine 100TX PCI Ethernet adapter is now operational.