ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
       º                                                              º
       º     Compex FreedomLINE 100TX/10base PCI Ethernet Adapter     º
       º        (C) Copyright PDS, 1998. All Rights Reserved.         º
       º                                                              º
       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ


ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INTRODUCTION ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 The packet driver FLPCIPD.COM (Ver2.20) for DOS conforms to the Packet Driver
 Specification v1.09 developed by FTP Software Inc.

 The driver is compatible with the following adapters.
    
        * -- FL100TX-PCI (21143) Rev.G1, G2, F8, F9 and F10

 
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ INSTALLATION GUIDE ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
    Refer to the procedure to install the packet driver using PCTCP for DOS.

    1. Run PCISNAP in Driver Disk 1 diskette and select Driver Installation.

    2. From the Driver Installation Menu, choose Packet Driver and
       then select "Install Packet Driver for FTP PC/TCP for DOS".

    3. Follow the instruction on each screen to complete the installation.

    4. Load the packet driver at the DOS command prompt or at the
       AUTOEXEC.BAT file.

       The command syntax for the packet driver is:

        usage: flpcipd [options] [pktdrvr_int_no] [link type]

        where

        options:
            -u -> unload packet driver

	pktdrvr_int_no: (packet driver interrupt)
            Valid value: 0x60->0x66, 0x68->0x6f, 0x78->0x7e
            If not specified, use default 0x60.

        link type:
            For 10base mode : TP, ,CR,LF
            For 100base mode: TP, 100TX ,CR,LF
            If not specified, Autodetect will proceed.

        e.g.

            FLPCIPD
            => Install FLPCIPD at interrupt 0x60, perform link autodetection.

            FLPCIPD 0x63
            => Install FLPCIPD at interrupt 0x63, perform link autodetection.

            FLPCIPD 0x64 TP
            => Install FLPCIPD at interrupt 0x64, take TP as link.

    5. Network applications can now use the packet driver. One example is
       PC/TCP software from FTP Software Inc. The PC/TCP kernel ETHDRV.EXE
       has to be loaded before PC/TCP applications such as PING.EXE, FTP.EXE
       or TN.EXE can run. For detailed information on PC/TCP application,
       please refer to the documentation in FTP's PC/TCP Network Software for
       DOS.